Manual Technaxx TX-60 - IP-cam (page 35 of 72) (English)

795993

Zoom out

Zoom in

1/72

Step 3: Click on the Save button after all settings have been entered and disconnect the network cable. Never

shut down the power of the camera until the IP camera is able to connect to the wireless network.

The LAN IP address will disappear on the window of Equipment Search Tool when the camera is configuring a

wireless connection. Wait about 1 minute, the camera should obtain a wireless connection, and the LAN IP of

the camera will show again on the window of the Equipment Search Tool. The IP address may have changed

after the camera receives a wireless connection; we recommend setting a static local IP address if this IP

address changes by right clicking the camera in Equipment Search Tools, setting a static IP, and pushing OK

(see Figure4.36).

Congratulations! You have set up the wireless connection of the camera successfully.

NOTE: If you fail to make a wireless connection, refer to your seller or contact us directly for

assistance.

WPS (Wi-Fi Protected Set-up)

Step 01:

Press and hold the WPS button for two seconds.

Step 02:

Press the WPS button on your router within 60 seconds. The WPS button is usually on the back or

side of your router. On some routers, you may need to log in to the web interface and click on an on-screen

button to activate the WPS feature. If you are not sure where the WPS buttons is on your router, please refer to

your router’s User Manual.

The camera will automatically create a secure wireless connection to your router. If you have plugged in the

network cable, please plug it out. The Equipment Search Tool will search the camera’s LAN IP. Make sure the

PC and the camera share the same subnet.

NOTE: The security mode of router cannot be WEP, or else the WPS settings may be failed.

WPS Button

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Technaxx TX-60 - IP-cam in the language / languages: English as an attachment in your email.

The manual is 4.06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Technaxx TX-60 - IP-cam Manual

Product: