Photo Stamp: (stamp the date & time on the photos or not): [Time & date]
(default) / [Date] / [Off]. → Select and press OK button to confirm.
Password Protection: [On] / [Off] (default). → Select and press OK button to
confirm.
Set the power-on password of the camera. The password is four digits, each
digit ranges from 0 to 9. Attention: If you set the password, write it down to
make sure that you do not forget it!
If you forget the password contact the support@technaxx.de for help.
Beep Sound: [On] / [Off] (default). → Select and press OK button to confirm.
Open den Beep sound menu to turn On or Off the confirmation sound of the
buttons.
Format Memory Card: [Yes] / [No] (default). → Select and press OK button to
confirm.
Attention: Formatting the memory card (FAT 32) will delete all data
permanently. Before using a new memory card or a card that has been used in
another device previously, please format the memory card.
Serial No.: [On] / [Off] (default). → Select and press OK button to confirm.
Set the unique serial number for the camera. The number is four digits, each
digit ranges from 0 to 9.
Reset Settings: [On] / [Off] (default). → Select and press OK button to
confirm.
Restore the camera to factory default settings including password, serial
number and so on.
Version: Look up the Firmware information of the camera.