760333
35
Zoom out
Zoom in
Previous page
1/146
Next page
34
Aux:
Click , system goes to the following interface. The options here are defined by the
protocol. The aux number is corresponding to the aux on-off button of the decoder. See
Figure 4-41.
Figure 4-41
4.7 Record and Snapshot
The record/snapshot priority is: Alarm->Motion detect->Schedule.
4.7.1 Encode
4.7.1.1 Encode
Encode setting is to set IP-CAM encode mode, resolution, bit stream type and etc
From Main menu->Setting->System->Encode, you can see the following interface. See
Figure 4-42 and Figure 4-45.
Channel: Select the channel you want.
Type: Select from the dropdown list. There are three options: regular/motion
detect/alarm. You can set the various encode parameters for different record types.
Compression: System supports H.264, MPEG4, MJPEG and etc.
Resolution: The mainstream resolution type is IP-CAMs encoding config. Generally
there is D1/720P/1080P. The main stream supports 2048×15363M,1920×1080
1080P, 1280×1024S×GA, 1280×9601.3M,1280×720720P,704
×576D1and the sub stream supports 704×576D1,352×288CIF.
Frame rate: It ranges from 1f/s to 25f/s in NTSC mode and 1f/s to 30f/s in PAL mode.
Bit rate type: System supports two types: CBR and VBR. In VBR mode, you can set
video quality.
Quality: There are six levels ranging from 1 to 6. The sixth level has the highest image
quality.
Video/audio: You can enable or disable the video/audio. Note, once you enable audio
function for one channel, system may enable audio function of the rest channels by
default.
CopyAfter you complete the setup, you can click Copy button to copy current setup
to other channel(s). You can see current channel number is grey. Check the number
to select the channel or you can check the box ALL. Click the OK button to complete
the setup. Note, once you check the All box, you set same encode setup for all
channels. Audio/video enable box, overlay button and the copy button is shield.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technaxx PRO TX-64 - WiFi NVR-Rekorder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technaxx PRO TX-64 - WiFi NVR-Rekorder in the language / languages: English as an attachment in your email.

The manual is 5.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technaxx PRO TX-64 - WiFi NVR-Rekorder

Technaxx PRO TX-64 - WiFi NVR-Rekorder User Manual - German - 159 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info