760333
29
Zoom out
Zoom in
Previous page
1/146
Next page
28
Figure 4-30
Now you can set corresponding information.
Resolution: There are five options: 1280×1024 (Default), 1280×720, 1920×1080,
1024×768 and 3840×2160. Note the system needs to reboot to activate current setup.
Note 3840×2160 is for some series only.
VGA+HDMI2: It is for dual-screen operation. Select from the dropdown list according to
your actual situation. Click Apply button, system needs to restart to activate new setup.
For example, 4+4 means for VGA, system max supports 4-window split and for HDMI2,
system max supports 4-window split.
Transparency: Here is for you to adjust transparency. The value ranges from 128 to 255.
Channel name: Here is for you to modify channel name. System max support 25-digit
(The value may vary due to different series). Note all your modification here only applies
to TX-64 local end. You need to open web or client end to refresh channel name.
Time display: You can select to display time or not when system is playback.
Channel display: You can select to channel name or not when system is playback.
Image enhance: Check the box; you can optimize the margin of the preview video.
Original scale: Check the box here to restore video original scale.
Click OK button to save current setup.
4.5.5 Preview Tour Parameters
Set preview display mode, channel display sequence and tour setup.
Set preview display mode: On the preview interface, right click mouse, you can view
right-click menu. Now you can select preview window amount and channel.
Set channel display mode: On the preview interface, if you want to change channel 1
and channel 4 position, right click channel 1 video window and then drag to the channel
4 video window, release button, you can change channel 1 and channel 4 position.
Tour setup: Here you can set preview window channel display mode and interval. Follow
the steps listed below.
From Main menu->Setting->System->Display->Tour, you can see an interface shown as in
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technaxx PRO TX-64 - WiFi NVR-Rekorder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technaxx PRO TX-64 - WiFi NVR-Rekorder in the language / languages: English as an attachment in your email.

The manual is 5.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technaxx PRO TX-64 - WiFi NVR-Rekorder

Technaxx PRO TX-64 - WiFi NVR-Rekorder User Manual - German - 159 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info