584446
55
Zoom out
Zoom in
Previous page
1/61
Next page
- 54 -
Connect a decoder without an aerial
socket to the TV
Connect the decoder to the TV with a
eurocable to SCART 1.
TV And Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you
also connect a eurocable to SCART sockets.
Playback NTSC
To use this option you can;
C o n n e c t N TS C V C R p l ay e r t o
Euroconnector at the rear side of the TV.
Connect NTSC VCR player to RCA Jacks at
the right side of the TV.
Then, press SOURCE button to select
proper source.
CopyFacility
Source selection for VCR recording.
Select options menu.
Select scart 2 out source pressing /
button.
Select Tuner to copy the picture from tuner.
Select FAV or Scart 1 to copy the picture
from FAV or SCART 1.
Search For And Store The Test
Signal Of The Video Recorder
Unplug the aerial cable from the aerial
socket ANT of your video recorder.
Switch on your TV and put the video recorder
on the test signal. (See the booklet for your
video recorder.)
• Enter the tv tuner menu in settings menu.
Enter the programming menu in tv tuner
menu and select manual search.
• Search for the test signal of your video re-
corder in the same way as you searched for
and stored the TV signals. See program-
ming menu. Store the test signal under
programme number 0.
Replace the aerial cable in the aerial
socket ANT of your video recorder once
you have stored the test signal.
Camera And Camcorder
To Connect To FAV Input
Connect your camera or camcorder FAV in-
put at the right side of the TV.
Connect your equipment to the TV via VIDEO
(yellow), AUDIO R (red) and AUDIO L (white)
inputs. You should connect the jacks to the
input in the same color.
To Connect To S-VHS Input
Connect your camera or camcorder S-VHS
input at the right side of the TV.
Connect your equipment to the TV via S-VHS
input and audio inputs of FAV inputs by us-
ing S-VHS cables.
Connect The Decoder To The
Video Recorder
Some video recorders have a special
euroconnector for decoder.
Connect a eurocable to the euroconnector of
your d ec o d e r a n d t o the spec i a l
euroconnector of your video recorder. See
also the booklet of your video recorder.
To connect your video recorder to the TV, see
TV and Video Recorder section.
If you want to connect more equipment to
your TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket at the
right side of the TV, to connect headphones.
Connecting the PC via VGA input
Power off both computer and TV before
making any connections.
• Connect the VGA cable to the VGA input of
your TV and to the 15-pin connector on the
rear of your computer.
Tighten the screws on the plugs until the
connectors are fastened securely.
• If you are using Windows operating system
running on a PC with a Microsoft Plug&Play
02-ENG-32700-1546 UK-32 INCH TFT-(AU-V4G5)(10 PAGE)(HD-READY)(NEW)-50081920.p65 11.05.2006, 16:0554
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TechLine TL-32LC700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TechLine TL-32LC700 in the language / languages: English, German as an attachment in your email.

The manual is 3,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info