Manual Team TT 1 (page 8 of 28) (English, German, Dutch, French, Italian, Portuguese, Spanish)

486860

Zoom out

Zoom in

1/28



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

8 TEAM TT 1 - 060110

Assembly page 8/28

Fax +32 2 359 95 50

BEFORE THE FIRST OPERATION

It is necessary to rinse your jug kettle and tea pot before their first use. Rinse the tea pot under

running water. To rinse the jug kettle, fill it with cold water and switch it on. When the water

boils, let the appliance cool down, rinse it and repeat the process 2 or 3 times making sure only

to put clear water in it.

USING THE JUG KETTLE

 Always remove the jug from the power base before filling it.

 Raise the lid by pressing its release button (1) situated on top of the lid and and fill the jug

with fresh water paying attention not to fill under the minimum mark and above the

maximum mark on the kettle. You can see the level thanks to the transparent water level

indicator. It is absolutely necessary to follow this instruction.

 Close the lid by pressing it down until it you hear a click. Make sure it closes correctly.

 Put the jug onto the power base (6), insert the cord into the opening in the back of the

base (11) and insert the plug into the wall socket. Put the switch (2) situated on the

handle of the jug kettle to position "1". The pilot light (3) comes on, indicating that the jug

kettle is heating.

 The jug kettle will switch off automatically when the water has boiled (the pilot light comes

out) but you can also stop it anytime by putting the kettle's switch in "0" position.

 For instant reboiling, wait until water has cooled down and switch on the appliance again.

USING THE TEA POT AND THE HOT PLATE

 Open the lid and fill the filter (4) with the desired amount of bulk tea (never use tea bags).

 After having boiled water with the jug kettle, pour the water gently in the tea pot, through

the filter.

 The level indicated on the teapot corresponds to the number of cups (4, 6, 8, 10).

 Press the tea gently with the pusher (5) of the lid.

 If you want to keep the tea warm, put the teapot on the hot plate (7) and put the switch

of the base (10) on the "1" position; the pilot light (8) on the front side of the base

illuminates to indicate that the base is switched on. Caution: this system only keeps the

tea warm; it does not allow to boil water. However, make sure not to let an empty teapot

on the hot plate when it is operating.

BOIL-DRY PROTECTION

 This jug kettle is protected with an automatic safety device if accidentally switched on

without water.

 Should this happen, switch off the appliance and wait about 10 minutes for the element to

cool. Then fill the jug kettle with cold water. This will reset the safety device. The kettle may

then be used as normal.

 Should the problem persist, please contact the nearest customer service.

CLEANING AND CARE

 Always unplug the base and let it cool down before cleaning. Detach the cord from the

basis before cleaning it.

 Clean the plastic and glass parts with soft cloth. Use a soft brush to clean the limescale on

the interior parts of the jug kettle.

 Never use abrasive products.

 Never immerse the jug kettle and the base in water or any other liquid.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team TT 1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team TT 1 Manual

Product: