Manual Team TeCom-IPX5 (page 11 of 27) (English, German, Italian, Spanish)

749146

Zoom out

Zoom in

1/27

20 21

Transmit

For transmission hold the PTT key (9) until the end of the message.

For best sound quality, talk into the microphone (4) with normal voice at a distance

of approximatly 10 cm.

During transmission the control LED (6) lights red.

Upon release of the PTT key (9) the radio returns automatically into reception mode.

Reception

Upon reception of a signal, the LED (6) lights green.

If the selected frequency is decoded with a CTCSS- / DCS-code, all signals that

are encoded with a different code will be muted. The green LED will light but no

signal will be audible.

KEY FUNCTIONS

PTT Key

The PTT key (9) is located at the left side of the radio. Pressing the PTT key will

switch the radio into transmission mode. The LED (6) will light red.

Multi-Function Keys

The multi function keys PF1 (10) and PF2 (11) are located below the PTT key (9).

Each of them are programmable via the software T-UP26 with two of the following

functions that are activated by pressing short or long:

relais tone 1450 Hz monitor

relais tone 1750 Hz scan (channel scan)

relais tone 2315 Hz 5-tone selective calling

relais tone

Transmits the programmed relais tone, 1450 kHz, 1750 kHz or 2315 kHz.

monitor

The monitor functions remains active until the key is pressed again.

EnglishEnglish

scan

Start / stop the channel scan function by pressing the key. Each channel can be

added to or deleted from the scan list by software programming.

This function is only available if at least two channels are added to the scan list.

5-tone selective calling

Transmits the via software programmed 5-tone selective encode.

This function is only available if 5-tone selective calling is enabled and if the actual

channel is set for 5-tone selective calling.

Alarm tone button

The alarm tone button is acticated via software. If activated, a short press of the but-

ton will start a 30 second long alarm tone. Once the tone stops, the radio remains in

transmission mode until the alarm tone function is stopped by pressing the PTT key.

Is the alarm tone function not activated, a short double tone will be audible, if the war-

ning tone function is active.

FUN-Taste (8)

Further functions are available when pressing the FUN key (8) in combination with

other keys.

FUN + PTT (9)

switch tx power high / low

FUN + ENT (13)

key lock On / Off

The key symbol appears once the function is activated. Only the PTT key (9) and

the FUN key (8) are available.

FUN + PF1 (10)

activates/deactivates the fm-radio function

Select the fm-radio frequency in the range of 88.5 MHz - 107.9 MHz by turning the

channel selector (3)

For channel scanning use the multi-function keys PF1 (10) (UP) and PF2 (11)

(DOWN).

Per software, up to 6 fm-radio frequencies can be stored. To recall these channels use

the following key combination after activating the radio function:

channel 1: VFO/MR (14) + 0channel 4: VFO/MR (14) + 3

channel 2: VFO/MR (14) + 1channel 5: VFO/MR (14) + 4

channel 3: VFO/MR (14) + 2channel 6: VFO/MR (14) + 5

Pressing the PTT key (9), while the fm-radio is activated, will pause the fm-radio

function until the PTT key is released.

tecom-ipx5_manual_2:Layout 1 7/25/2014 11:51 AM Seite 20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team TeCom-IPX5 in the language / languages: English, German, Italian, Spanish as an attachment in your email.

The manual is 0,55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team TeCom-IPX5 Manual

Product: