749145

Team TeCom-IP3 Manual

12
Zoom out
Zoom in
Previous page
1/27
Next page
22 23
English BASIC FUNCTIONS
Antenna
In the PMR version, due to governmental regulations, the
antenna is fixed, i.e. non-detachable.
Battery Pack
To attach the battery pack (11), place the battery pack onto the radio and press the
bottom part close to the radio case and close the lock.
Charging
Prior to first use, the battery pack has to be charged completely. A completely
empty battery pack needs to be charged for approximately three hours. During the
charging process, the LED lights red. Once charging is completed, the LED lights
green.
Remove the battery pack out of the charger. Overcharging reduces the battery
packs longevity.
On / Off
To turn the radio on, turn the On / Off switch (2) clockwise beyond the barrier. A
beep tone is emitted if the beep tone function is activated.
To turn off the radio, please turn the On / Off switch (2) counterclockwise beyond
the barrier.
Volume Control
To set a comfortable volume level after turning the radio on, activate the monitor
function by pressing the according multi-functional key PF1/2 (9) (which has to be
programmed via software) while adjusting the volume level with the combined
On/Off-Volume key (2).
Channel Selection
For channel selection, use the rotary channel selector (3) switch.
The channels are selected in the programmed order.
English
Transmit
For transmission hold the PTT key (8) until the end of the message.
For best sound quality, talk into the microphone (4) with normal voice at a distance
of approximatly 10 cm.
During transmission the control LED (6) lights red.
Upon release of the PTT key (8) the radio returns automatically into reception mode.
Reception
Upon reception of a signal, the LED (6) lights green.
If the selected frequency is decoded with a CTCSS- / DCS-code, all signals that
are encoded with a different code will be muted. The green LED will light but no
signal will be audible.
KEY FUNCTIONS
PTT Key
The PTT key (8) is located at the left side of the radio. Pressing the PTT key will
switch the radio into transmission mode. The LED (6) will light red.
Multi-Function Keys
The multi function keys PF1 and PF2 (9) are located below the PTT key (8). Each of
them are programmable via the software T-UP31 with two of the following functions
that are activated by pressing short or long:
Monitor Scan VOX
Priority Scan Revert Frequency
Offline Power (Low/High)
monitor
The monitor functions remains active until the key is pressed again.
scan
Start / stop the channel scan function by pressing the key. Each channel can be
added to or deleted from the scan list by software programming.
This function is only available if at least two channels are added to the scan list.
tecom-ip3_man_V5_18-2-14_Layout 1 14.02.2018 10:37 Seite 22
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team TeCom-IP3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team TeCom-IP3 in the language / languages: English, German, Italian, Spanish as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info