Manual Team ST 28EC (page 12 of 32) (English, German, Dutch, French, Italian, Portuguese, Spanish)

487324

Zoom out

Zoom in

1/32

Generated by Unregistered Batch DOC TO PDF Converter

2011.3.804.1511, please register!

Copies of the I/B. Please reproduce them without any changes

except under special instruction from Team International

BELGIUM. The page must reproduced and folded in order to

obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).

The page must be folded in order to keep the good numbering

when you turn the page of the I/B . Don‟t change the page

numbering. Keep the languages integrity.

Assembly page 12/32

Fax +32 2 359 95 50



UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)

This product must only be used from a 13 amp power socket. If a BS1363 approved 13 amp plug is

used, it should be fitted with a 13 amp fuse. The wires on the power cord are colour coded:

blue = neutral, brown = live, green or green & yellow = earth.

The blue wire must be connected to the terminal marked N or coloured in black.

The brown wire must be connected to the terminal marked L or coloured in red.

The green (& yellow) wire must be connected to the terminal marked E or coloured in green (&

yellow).

ASSEMBLING THE VACUUM CLEANER

 Always remove the plug from the power socket before fitting or removing accessories!

 Insert the connection wand into hose connection inlet until it locks by before pressing two

connection buttons on hose connection wand (Fig. 1).

 When removing hose assembly, pull out hose connection wand with pushing down two

connection buttons.

 Fitting the telescopic tube to the handle (Fig. 2).

 Fitting the telescopic tube to the floor brush (Fig. 3).

 You can adjust the length of telescopic tube by pushing the button (Fig. 4).

 Removing telescopic tube and accessories: to remove the accessories, pull firmly apart.

 The floor brush is ideal for the daily cleaning of carpets and hard floors.

Press the lever (A) for cleaning hard floors.

Press the lever (B) for cleaning carpets.

 The appliance is delivered with a crevice tool: for radiators, crevices, corners, baseboards and

between cushions.

OPERATIONS

 Pull out a sufficient of length of power cord and insert the plug into the power socket. A yellow

mark on the power cable shows the ideal cable length. Do not extend the cable beyond the red

mark.

 It is advisable to set the electronic power regulator to MIN before switching the appliance on. By

moving the regulator button, the suction power can be adjusted.

WHEN CLEANING IS FINISHED

 Stop the vacuum cleaner by depressing on the switch button.

 Disconnect plug from electrical outlet

 Simply press lightly with your foot on cable rewind button on top of cleaner.

Replacing the dust bag

 Always operate the cleaner with dust bag installed

 Disconnect from electrical outlet before changing dust bag.

 Lift dust cover catch and raise dust cover.

 Remove bag collar from bag holder and pull out dust bag.

 Put in new dust bag and close the dust cover.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team ST 28EC in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team ST 28EC Manual

Product: