Manual Team RC 8 (page 10 of 32) (English, German, Dutch, French, Italian, Portuguese, Spanish)

487220

Zoom out

Zoom in

1/32



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced and

folded in order to obtain a booklet A5 (+/- 148.5 mm width x

210 mm height). When folding, make sure you keep the good

numbering when you turn the pages of the I/B. Don’t change

the page numbering. Keep the language integrity.

10 TEAM RC 8 - 100713

Assembly page 10/32

Fax +32 2 359 95 50

 Then put the ingredients into the bowl. We advise you to cut ingredients like meat or

vegetables into pieces beforehand in order to get a homogeneous preparation.

 Place the lid with feeding tube onto the processor bowl as indicated in paragraph “Use”

making sure the metal shaft of the lid gets into the hole in the middle of the blade support.

 Plug in the appliance.

 For chopping, select speed 1 or 2. CAUTION: Do not try to chop very hard food (such as

ice, sugar or coffee grains…).

 When you use your appliance in an intensive way, it is necessary to make breaks of at

least 1 minute between every operation to let the motor cool down.

 CAUTION: The metal chopping blade is very sharp.

b) Grating / Slicing

 Make sure that the appliance is unplugged and that the ON/OFF & speed switch is in "0"

position.

 Place the processor bowl onto the shaft and make sure that the three lugs at the bottom

of the bowl fit into the three small slots of the base and turn the bowl clockwise until it

clicks into place.

 Slide the accessory for grating/slicing onto the support with the grating blade upwards for

grating or with the slicing blade upwards for slicing.

 Place the whole on the shaft.

 Place the lid with feeding tube onto the processor bowl as indicated in paragraph “Use”

making sure the metal shaft of the lid gets into the hole in the middle of the blade support.

 Cut the potatoes, carrots, cucumbers etc. into pieces and place the ingredients into the

funnel of the bowl lid.

 Use the pusher to push food down the funnel. Never use your fingers or any other utensil.

 Plug in the appliance and turn the ON/OFF & speed switch to “1” to start. Adjust the

speed if necessary.

 Always turn the ON/OFF & speed switch to “0” and unplug the appliance before emptying

the bowl and be careful when handling the blades, as they are very sharp.

 When you use your appliance in an intensive way, it is necessary to make breaks of at

least 1 minute between every operation to let the motor cool down.

CLEANING

 Unplug the appliance.

 Turn the lid with feeding tube anticlockwise to take it off.

 Remove the accessories and the bowl. Be careful not to hurt yourself with the blades.

 Rinse the processor bowl and the accessories out and let them dry.

 Use a sponge if necessary. Be careful not to hurt yourself with the blades.

 The motor unit can only be cleaned with a slightly damp cloth.

IMPORTANT:

! Never put the motor unit under running water or into the dishwasher, but clean it with a

slightly damp cloth.

! Handle the blades carefully when cleaning. They are extremely sharp.

PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2002/96/EC

In order to preserve our environment and protect human health, the waste electrical and

electronic equipment should be disposed of in accordance with specific rules with the

implication of both suppliers and users. For this reason, as indicated by the symbol on the

rating label or on the packaging, your appliance should not be disposed of as unsorted

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team RC 8 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team RC 8 Manual

Product: