Manual Team rc 5 (page 15 of 64) (English, German, Dutch, French, Italian, Portuguese, Spanish)

380791

Zoom out

Zoom in

1/64



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced and

folded in order to obtain a booklet A5 (+/- 148.5 mm width x

210 mm height). When folding, make sure you keep the good

numbering when you turn the pages of the I/B. Don’t change

the page numbering. Keep the language integrity.

15 TEAM RC 5 - 091211

Assembly page 15/64

Fax +32 2 359 95 50

 Place the lid with feeding tube onto the processor bowl as indicated in paragraph “Use”

making sure the metal shaft of the blades gets into the hole in the middle of the lid (fig. 7

& 8, page 6).

 Plug in the appliance.

 For chopping, select a speed between 2 and 4. CAUTION: Do not try to chop very hard

food (such as ice, sugar or coffee beans…).

 When you use your appliance in an intensive way, it is necessary to make breaks of at

least 1 minute between every operation to let the motor cool down.

b) Whisking

Do not use the whisking blade (16) to knead heavy dough such as tart pastry or pizza dough.

 Make sure the appliance is unplugged, that the ON/OFF & speed switch (6) is in "0"

position and that the safety lid (20) is closed.

 Place the processor bowl (10) onto the shaft (fig. 2, page 6) and turn it clockwise until the

handle reaches the switch connector (8) (fig. 3, page 6).

 For whisking, place the blade support (18) onto the shaft (9) (fig. 4, page 6) and put the

whisking blade (16) on the support (18) (fig. 5, page 6).

 Put the ingredients into the bowl.

 Place the lid with feeding tube onto the processor bowl as indicated in paragraph “Use”.

 This accessory can be used to whisk egg whites and prepare sauces like mayonnaise or

custard.

 Plug in the appliance and turn the ON/OFF & speed switch to a speed between 2 and 4.

 It is possible to add ingredients during the process through the funnel of the lid.

 When you use your appliance in an intensive way, it is necessary to make breaks of at

least 1 minute between every operation to let the motor cool down.

c) Grating / Slicing

 Make sure the appliance is unplugged, that the ON/OFF & speed switch (6) is in "0"

position and that the safety lid (20) is closed.

 Place the processor bowl (10) onto the shaft (fig. 2, page 6) and turn it clockwise until the

handle reaches the switch connector (8) (fig. 3, page 6).

 Place the support (18) on the shaft (9) (fig. 4, page 6).

 For grating, slide the grating blade (13) into its support (15) (fig. 9, page 6). For slicing, slide

the slicing blade (14) into its support (15) (fig. 9, page 6).

 Place the whole on the support shaft (fig. 10, page 6).

 Place the lid with feeding tube onto the processor bowl as indicated in paragraph “Use”

making sure the metal shaft of the blades gets into the hole in the middle of the lid (fig. 11,

page 6).

 Cut the potatoes, carrots, cucumbers… into pieces and place the ingredients into the

funnel of the bowl lid.

 Use the pusher (12) to push the food down the funnel (fig. 12, page 6). Never use your

fingers or any other utensil.

 Plug in the appliance and turn the ON/OFF & speed switch to “1” to start. Adjust the

speed if necessary.

 Always turn the ON/OFF & speed switch to “0” and unplug the appliance before emptying

the bowl and be careful when handling the blades, as they are very sharp.

 When you use your appliance in an intensive way, it is necessary to make breaks of at

least 1 minute between every operation to let the motor cool down.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team rc 5 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Team rc 5

Team rc 5 Manual - German - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info