487208

Team QH 1 Manual

8
Zoom out
Zoom in
Previous page
1/20
Next page
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International
BELGIUM. The page must reproduced and folded in order to
obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).
The page must be folded in order to keep the good numbering
when you turn the page of the I/B . Don’t change the page
numbering. Keep the languages integrity.
8
Assembly page 8/20
Fax +32 2 359 95 50
Do not use water or any cleaning products. Prefer a soft cloth.
(*)
Competent qualified service: after sales department of the producer or importer or any person who
is qualified, approved and competent to perform this kind of repairs in order to avoid all danger. In
any case you should return the appliance to this service.
UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)
This product must only be used from a 13 amp power socket. If a BS1363 approved 13 amp plug is
used, it should be fitted with a 13 amp fuse. The wires on the power cord are colour coded:
blue = neutral, brown = live, green or green & yellow = earth.
The blue wire must be connected to the terminal marked N or coloured in black.
The brown wire must be connected to the terminal marked L or coloured in red.
The green (& yellow) wire must be connected to the terminal marked E or coloured in green (&
yellow).
MOUNTING
To operate more easily lay the heater horizontally.
Unscrew both screws located on the lower part of the appliance.
Take out the power cord from the hole which is in the center of the base and mount this base on the
lower part.
Insert the screws the base and tighten them.
USE
Connect the appliance and put the main switch on the “I” position and the central lamp will start
working. The two other halogen lamps can be switched on with their respective switches.
Press the switch “4”, to move the heater to the right and to the left.
To switch off the appliance, put the switches on the “off” position and remove the plug.
Your appliance is fitted with a security device which switch off your appliance when it falls. If
your appliance falls, switch it off, replace it correctly and switch it on again.
In case your appliance does not work when you switch it on, check that it is correctly placed and
that the security device is not blocked.
MAINTENANCE AND CLEANING
Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled
down completely.
The housing may be wiped with a slightly damp, lint-fee cloth.; do not use any abrasive scouring
pad or steel wool.
The grid are particularly delicate; to clean them you can carefully use a vacuum cleaner.
When you do not use the appliance, you can cover and place it in a dry environment.
To replace the cord you need a special tool : see a competent qualified electrician.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team QH 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team QH 1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info