404921
9
Zoom out
Zoom in
Previous page
1/32
Next page
Generated by Unregistered Batch DOC TO PDF Converter
2011.3.804.1511, please register!
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International
BELGIUM. The page must reproduced and folded in order to
obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).
The page must be folded in order to keep the good numbering
when you turn the page of the I/B . Don’t change the page
numbering. Keep the languages integrity.
9
Assembly page 9/32
Fax +32 2 359 95 50
UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)
This product must only be used from a 13 amp power socket. If a BS1363 approved 13 amp plug is
used, it should be fitted with a 13 amp fuse. The wires on the power cord are colour coded:
blue = neutral, brown = live, green or green & yellow = earth.
The blue wire must be connected to the terminal marked N or coloured in black.
The brown wire must be connected to the terminal marked L or coloured in red.
The green (& yellow) wire must be connected to the terminal marked E or coloured in green (&
yellow).
BEFORE USE
Thoroughly rinse all the pieces of the "Brewing System" and inside the carafe.
Then operate the percolator twice (without tea or coffee) to remove any traces of dust or grease
from inside, follow the "how to operate" instruction below.
HOW TO OPERATE
Open the lid.
Remove the "Brewing System" by lifting the orange knob. This will allow all of the following
items to be removed together: filter bowl, distributor plate and percolator tube.
Fill the carafe with water to the required level. The maximum water is 1.0 litre and the minimum
is 0.3 litre. This is marked on the outside of the bowl. Take care not to allow water to run over
the outside of the carafe, mouldings and into the electrical socket at the rear.
Fill the filter bowl with the desired amount of loose tea, tea bags or coffee. Do not fill above the
maximum line marked inside the filter bowl. See "Making perfect Tea & Coffee" guide below..
Replace the "Brewing System" by picking up the orange knob and place it all into the bowl.
Ensure that the percolator tube fits into the hole in the heating element and that the filter bowl
and distributor plate are all fitted together correctly.
The lid can now be closed.
Attach the power cord to the percolator and then plug into the power supply.
The "power on" light will now be illuminated and the brewing will begin.
The brewing will take approximately 7-12 minutes depending on the amount and temperature of
the water used.
When the brewing is completed the power light will switch off and the drink is ready to serve.
WARNING: This percolator makes very hot tea and coffee.
If the drink is not required immediately the product will switch automatically to a "hold"
position. This will keep the drink hot by switching the power back on for a short period every
few minutes. Remember the drink will slowly evaporate and become stronger in taste the longer
it is left to stand.
Before pouring unplug from the power supply and detach the power cord. After pouring the
percolator can be plugged back in the power supply to keep the drink hot. Do not switch back on
if the drink level is below the 0.3 litre Min level.
WARNING: Protect the glass carafe from breaking. Do not refill with cold water until the percolator
has cooled completely.
MAKING PERFECT TEA AND COFFEE
Always use fresh water taken directly from the tap.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team pc 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team pc 1 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info