487128
9
Zoom out
Zoom in
Previous page
1/24
Next page
Generated by Unregistered Batch DOC TO PDF Converter
2011.3.804.1511, please register!
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International
BELGIUM. The page must reproduced and folded in order to
obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).
The page must be folded in order to keep the good numbering
when you turn the page of the I/B . Don’t change the page
numbering. Keep the languages integrity.
9
Assembly page 9/24
Fax +32 2 359 95 50
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the requested breaks. Failure to follow
this instruction carefully may result in damage to the motor. Please refer to the rating label for the
maximum continuous usage time (KB xx min. or xx is the maximum usage time). The breaks
should last at least 10 minutes.
UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)
This product must only be used from a 13 amp power socket. If a BS1363 approved 13 amp plug is
used, it should be fitted with a 13 amp fuse. The wires on the power cord are colour coded:
blue = neutral, brown = live, green or green & yellow = earth.
The blue wire must be connected to the terminal marked N or coloured in black.
The brown wire must be connected to the terminal marked L or coloured in red.
The green & yellow wire must be connected to the terminal marked E or coloured in green & yellow.
HOW TO USE
Your new stick mixer is a convenient and easy to use for powerful high speed blending. It is great for
shakes, soups, sauces, omelettes and much, much more.
Before using for the first time, the appliance should be cleaned with a damp cloth. Ensure the
unit is unplugged first!
Screw the shaft onto the screw thread at the bottom of the motor unit. Take care to screw the
shaft in the direction shown by the locked symbol . This is a left-hand screw thread. Using
gentle hand pressure only ensures that the shaft is fully tightened on to the motor unit.
Put the ingredients into a suitable container such as a mixing bowl, cooking pan or mixing
beaker (if included). Do not over fill to avoid splashing when the motor is switched on.
Plug in at the mains.
Put the shaft of the appliance into the ingredients before pressing the on switch. This will avoid
splashing when the motor is switched on.
Switch on motor and blend but remember to use for no longer than 3 minutes continuous use.
The motor must then be rested for 10 minutes.
HOW TO CLEAN DETACHABLE METAL LEG
Always unplug the unit before cleaning.
The motor unit should only be wiped down with a moist cloth.
Unscrew the shaft from the screw thread at the bottom of the motor unit. Take care to screw the
shaft in the direction shown by the unlocked symbol , This is a left-hand screw thread. .
Wash the shaft under running water immediately after use. If it is very dirty, it can be washed in
warm washing-up water.
DO NOT wash the metal detachable shaft in a DISHWASHER. The chemicals used in
dishwashers will mark and stain the surface of the aluminium leg.
Dry the metal detachable shaft thoroughly after washing.
For best results after cleaning and drying, lightly coat the metal surfaces with cooking oil. This
will keep the finish bright and stain free.
NEVER IMMERSE THE MOTOR UNIT IN ANY LIQUID.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team MS 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team MS 9 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info