Manual Team mc 3 (page 8 of 36) (English, German, Dutch, French, Italian, Portuguese, Spanish)

400947

Zoom out

Zoom in

1/36



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

8 TEAM MC 3 - 091208

Assembly page 8/36

Fax +32 2 359 95 50

 We recommend that when using your product you operate the motor unit in short on/off

pulses. This will give better chopping, mixing, etc. It will also protect the motor against a

too long use.

 The chopper is designed to be used exclusively in its delivery state (bowl, lid and blades in

good state) because it gives all the needed securities. Do not try to substitute one of those

pieces by another one and if you have to replace one, contact your after-sales service.

 Caution: your appliance has a security device that avoids excessive starting. Do not try to

overrule this device, as it could be very dangerous for you.

(*)

Competent qualified electrician: after-sales department of the producer or importer or any

person who is qualified, approved and competent to perform this kind of repairs in order to

avoid all danger. In case of need you should return the appliance to this electrician.

IMPORTANT INFORMATION

This appliance is not designed for professional use. You should follow the requested breaks.

Failure to follow this instruction carefully may result in damage to the motor. Please refer to the

rating label for the maximum continuous usage time (KB xx min where xx is the allowed

maximum usage time). The breaks should last at least 10 minutes.

MOUNTING AND USE OF THE MINI-CHOPPER (see page 3)

Caution: for your own safety and a good functioning it is absolutely necessary to respect the

mounting described hereunder.

 Place the blade of the mixer fitting in the jug (1).

 Put the ingredients in the jug.

 Place the lid on the jug respecting the positioning of its openings-out (2). If necessary, turn

the lid until it is correctly placed on the jug.

 Place the unplugged motor block on the jug (3) respecting the positioning of the

openings-out. If the motor block is not mounted correctly, it will be impossible to start the

appliance.

 Plug in the appliance.

 To start, press the motor block with your hand holding the jug with the other hand.

 To remove food, unplug and proceed the other way round, but pay attention not to get

injured, as the blade is very sharp.

TIPS FOR USE

 Your appliance is not intended to work for long periods. So if your preparation requires

more than 1 minute of continuous use, it is absolutely necessary to follow breaks. The

breaks should last at least 2 minutes to allow the motor to cool down.

 We advise you to chop the food by fits and starts and if necessary to mix them with a

spatula between two chopping processes following the safety instructions.

 If you chop pieces of meat or cheese, we advise you to cut them into small pieces of 1 to

1.5 cm beforehand in order to obtain a homogeneous and fine chopping. Otherwise you

could obtain lumps in your preparation.

CLEANING

 Unplug from outlet before cleaning.

 You can wipe the motor block with a lightly damp cloth. Never immerse it in water or any

other liquid. If this happens, do not plug it in, let it dry for at least 24 hours before using it

again. If this is not enough, bring your appliance back to a competent qualified

electrician.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team mc 3 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,81 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team mc 3 Manual

Product: