487106

Team M4 Manual

8
Zoom out
Zoom in
Previous page
1/24
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
8 TEAM M 4 - 050202
Assembly page 8/24
Fax +32 2 359 95 50
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the requested breaks. Failure to
follow this instruction carefully may result in damage to the motor. The maximum operation
time for beaters and dough hooks is 5 minutes, for the stick attachment the maximum
operation time is 1 minute. The breaks should last at least 10 minutes.
ASSEMBLING
Make sure that the switch is in "0" position, and that the appliance is unplugged.
Beaters/Hooks: Insert the beaters/hooks under the body of the mixer and turn slightly until
you hear a clicking sound.
When mounting the hooks, watch the mark next to the openings. Large circle – dough
hook with ring.
Press the ejection button on top of the mixer to release accessories.
Assembling the mixer on the base and bowl
Make sure that the appliance is switched off and unplugged from the power supply.
Put the arm of the base in horizontal position and slot the appliance into it. By pushing on
the back of the appliance, the appliance can be fixed tightly onto the arm of the base.
Press the release button of the base and bring the arm of the base together with the
appliance in a oblique position. Tip the arm of the base as far as you can until you hear a
click. Now you can insert the accessories (dough hooks or beaters). Please make sure to
insert the dough hooks correctly (see drawing next to the openings).
Put the arm of the base back in its horizontal position by pressing its release button again.
You can now plug in the appliance and select a lower speed. The bowl turns
automatically.
Assembling the stick attachment
Place the switch to the position “0” and unplug the appliance.
Pay attention that the other accessories are to be removed from the appliance.
Open the valve on the bottom of the appliance. Then you will see the opening for the
stick attachment
Place the stick attachment in the opening so that both shafts, the one on the appliance
and the other one on the stick attachment are facing each other. Turn the stick
attachment 90° clockwise until it stops.
To disassemble the stick attachment, switch off the appliance and unplug it.
Turn the stick attachment anticlockwise and take it away from the appliance. And then
replace the valve on the opening at the bottom of the appliance.
USE OF THE STICK ATTACHMENT
The stick attachment can be used to:
mix liquids (milk, juice, yoghurt …)
blend soup or tomatoes
make mayonnaise, remolade.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team M4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team M4 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info