487108
11
Zoom out
Zoom in
Previous page
1/31
Next page
Generated by Unregistered Batch DOC TO PDF Converter
2011.3.804.1511, please register!
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International
BELGIUM. The page must reproduced and folded in order to
obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).
The page must be folded in order to keep the good numbering
when you turn the page of the I/B . Don’t change the page
numbering. Keep the languages integrity.
11
Assembly page 11/31
Fax +32 2 359 95 50
(*)
Competent qualified electrician : after sales department of the producer or importer or any person
who is qualified, approved and competent to perform this kind of repairs in order to avoid all danger.
In any case you should return the appliance to this electrician.
UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)
This product must only be used from a 13 amp power socket. If a BS1363 approved 13 amp plug is
used, it should be fitted with a 13 amp fuse. The wires on the power cord are colour coded:
blue = neutral, brown = live, green or green & yellow = earth.
The blue wire must be connected to the terminal marked N or coloured in black.
The brown wire must be connected to the terminal marked L or coloured in red.
The green (& yellow) wire must be connected to the terminal marked E or coloured in green (&
yellow).
IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the requested breaks. Failure to follow
this instruction carefully may result in damage to the motor. Please refer to the rating label for the
maximum continuous usage time (KB xx min where xx is the maximum usage time). The breaks
should last at least 10 minutes.
ASSEMBLY (see Page 4)
Make sure that the switch is in "0" position, and that the appliance is disconnected.
Beaters/Hooks: Insert the beaters/hooks under the body of the mixer and turn slightly until you
hear a clicking sound (see Page 5).
Press the ejection button on top of the mixer to release accessories.
ASSEMBLY OF THE STICK ATTACHMENT
Place the switch to the position “0” and unplug the appliance.
Pay attention that the other accessories are to be removed from the appliance.
Remove the valve on the bottom of the appliance. Then you will see the opening for the stick
attachment
Place the stick attachment in the opening so that both shafts, the one on the appliance and the
other one on the stick attachment are facing each other. Turn the stick attachment 90° clockwise
until it stops.
To disassemble the stick attachment switch off the appliance and unplug it.
Turn the stick attachment anticlockwise and take it away from the appliance. And then replace
the valve on the opening at the bottom of the appliance.
USE OF THE STICK ATTACHMENT
The stick attachment can be used to:
-mix liquids (milk, juice, jogurt …)
-blend the soup, tomatoes
-making of mayonnaise, remoulade.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team M 19 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team M 19 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info