Manual Team LCmobile Com (page 12 of 21) (English, German, Spanish)

749155

Zoom out

Zoom in

1/21

22 23

English English

CALL TONES

The LCmobile has three different call tone systems available: DTMF, 2-Tone and 5-Tone. Each

channel can be individually programmed with one of these calling functions.

Note: Selective calling between radios of different manufacturers is sometimes not satisfactory

or even malfunctioning due to different settings between the radios. Please pay attention that

all matching settings use the same values. Different time intervals for reset time, delay time,

etc. can cause malfunctioning.

DTMF

The DTMF call can be used as single and group call. 16 encodes with a maximum of 24 digits

can be programmed. For decoding the functions Remotely Stun (deactivation of the transmis-

sion mode), Remotely Kill (deactivation of the transmission and reception mode) and reactiva-

tion are available.

The function PTT-ID allows to automatically transmit a DTMF call upon pressing and/or relea-

sing the PTT key.

These settings are available for software programming:

DTMF Transmitting Time : 30 / 50 / 100 / 200 / 300 / 500 ms

DTMF Self ID : 3 digit encode, serves as radio ID

Group Code : Off / A / B / C / D / * / #

Decoding Response : Off / Beep Tone / Beep Tone and Response

First Digit Time : 0-2500ms in 10ms-steps

Pretime : 0-2500ms in 10ms-steps

Auto Reset Time : 0-25s in 0.1s-steps

Time Lapse after Encode : 10-2500ms in 10ms-steps

PTT ID Pause Time : Off / 5-75s in 1s-steps

Side Tone : call sequence autible yes / no

PTT ID Starting : transmit code upon pressing the PTT key, max. 24 digits

PTT ID Ending : transmit code upon releasing the PTT key, max. 24 digits

Remotely Kill * : deactivates tx and rx; max. 24 digits

Remotely Stun * : deactivates the transmission mode; max. 24 digits

DTMF Encodes : max. 16 encodes M1-M16; each max. 24 digits

* for reactivation the same code with the number symbol (#) added to the end must be received.

2-Tone

Beside one decode that serves as a unique radio ID, a maximum of 32 encodes are available.

The indivual frequencies can be programmed in the range 288.0 Hz - 3116.0 Hz.

These settings are available:

Encode

1st Tone Duration : 0.5-10s in 0,1s-steps

2nd Tone Duration : 0.5-10s in 0,1s-steps

Long Tone Duration : 0.5-10s in 0,1s-steps

Gap Time : 0-2000ms in 100ms-steps

Auto Reset Time : 0-25s in 0,1s-steps

Side Tone : tone sequence audible yes / no

encodes : max 32, 1st/2nd tone frequency (Hz), Name (max 5 symbols)

Decode

2-Tone Call Format : any combination of A / B / C / D and Long A / B / C

Decoding Response : None / Beep Tone / Beep Tone & Respond

A-/B-/C-/D-Tone Freq.: 288.0 Hz - 3116.0 Hz

5-Tone

For the 5-tone calling the standards ZVEI1/2, CCIR1 and CITT are available. 100 encodes

can be programmed. The letter Aserves as the group call symbol and the letter Eis used for

the repetition symbol.

Once a proper 5-tone selective call has been received, the channel number in the display

starts blinking until the PTT key is pushed.

These settings are available:

Self ID : 5 digits

Decode Standard : ZVEI1/2 / CCIR1 / CCITT

Time of Decode Tone : transmit time for the code; 30-100ms

Pretime : 10-2550ms

Auto Reset Time : 0-25s in 0,1s-steps

Time Lapse after Encode : 10-2500ms in 10ms-steps

First Delay : 10-2500ms in 10ms-steps

Side Tone : tone sequence audible yes / no

Information ID No. : max 8 kill/stun/wakeUp decodes

Function Option : Remotely Kill (deactivation of the transmit and reception

mode) /

Remotely Stun (deactivation of the transmit mode) /

Remotely Wake Up (reactivation)

Decoding Response : Beep Tone and Respond

Information ID : enter decode

Function Name : enter name (not required)

Encode ID : max 100 encodes; max. 5 digits

LCmobile_man_1:Layout 1 2/15/2016 3:39 PM Page 22

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team LCmobile Com in the language / languages: English, German, Spanish as an attachment in your email.

The manual is 0,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team LCmobile Com Manual

Product: