Manual Team KA VT 28 (page 6 of 28) (English, German, Dutch, French, Italian, Portuguese, Spanish)

487066

Zoom out

Zoom in

1/28



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

6 TEAM KA VT 28 - 091218

Assembly page 6/28

Fax +32 2 359 95 50

OPERATION

 Plug in the appliance and press the “ON/SPEED” key on the control panel or on the

remote control to turn the fan on.

 NORMAL MODE: To increase the speed setting of the fan, press “ON/SPEED” again. The

corresponding indicator lamp will come on to show the selected speed.

LOW Low

MED Medium

HI High

 NATURAL BREEZE MODE: For natural breeze movement (variable fan speed), press the

“MODE” key on the remote control. “NAT” will light on the control panel. The NATURAL

BREEZE mode also has 3 speeds which are the same as for the NORMAL mode but they

function differently. This mode simulates a natural breeze by switching constantly

between the desired speed (HI-MED-LO) and a very low speed.

 SLEEP MODE: Press “MODE” again to select the sleep setting, “SLP” will light on the control

panel. The SLEEP mode functions in the same way as the NATURAL BREEZE mode but slows

down after a certain period of time. In the SLEEP mode, the speed will change as follows:

HI (high speed): The fan will work as in the NATURAL BREEZE mode at high speed for 30

minutes, then as in the NATURAL BREEZE mode at average speed for

30 minutes, and finally as in the NATURAL BREEZE mode at low speed

for as long as the fan will be switched on.

MED (average speed): The fan will work as in the NATURAL BREEZE mode at average

speed for 30 minutes, then as in the NATURAL BREEZE mode at low

speed for as long as the fan will be switched on.

LOW (low speed): The fan will work as in the NATURAL BREEZE mode at low speed

constantly.

 To switch on the oscillation function, press the “OSCIL” key on the control panel or SWING

on the remote control, press again to stop. The oscillation will stop with the fan in the last

position before pressing the button.

 The fan can be used continuously or on a timer (only with remote control). To select the

timer, press “TIMER” on the remote control and continue to press to cycle through the

settings (0.5 to 7.5 hrs). The lights will come on to show the selected time. For example, all

lights will be lit when 7.5hrs is selected, the 0.5, 1 & 2 lights will be lit when 3.5hrs is

selected… The light combination will change as the time progresses to show the time

remaining before the fan will stop.

 Press “OFF” on the control panel or on the remote control to switch the fan off.

 TILTING ADJUSTMENT: You can tilt the head of the fan in order to aim the air at a certain

place at an angle. Take the base with one hand and hold the motor block with the other

hand. Tilt the head of the fan carefully until the desired angle is obtained. Take care not to

tilt the head backward too much, beyond its limits, in order to avoid damaging the

appliance.

CLEANING AND CARE

 Always disconnect the power supply cable from the power supply before carrying out any

cleaning operation.

 To remove dirt from the plastic surfaces, use a soft damp cloth. Use a vacuum cleaner to

remove the dust from the guards without having to disassemble them.

 Never immerse the fan in water or any other liquid.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team KA VT 28 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team KA VT 28 Manual

Product: