487013

Team HDM 2 Manual

9
Zoom out
Zoom in
Previous page
1/27
Next page
Generated by Unregistered Batch DOC TO PDF Converter
2011.3.804.1511, please register!
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International
BELGIUM. The page must reproduced and folded in order to
obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).
The page must be folded in order to keep the good numbering
when you turn the page of the I/B . Don‟t change the page
numbering. Keep the languages integrity.
9
Assembly page 9/27
Fax +32 2 359 95 50
UK STYLE PLUG WIRING INSTRUCTIONS (IN THE UK ONLY)
This product must only be used from a 13-amp power socket. If a BS1363 approved 13-amp plug is
used, it should be fitted with a 5 amp fuse. The wires on the power cord are colour coded:
Blue = neutral, Brown = live.
The blue wire must be connected to the terminal marked N or coloured in black.
The brown wire must be connected to the terminal marked L or coloured in red.
UNPACKING OF THE APPLIANCE
Remove the contents from the box (appliance, transparent steam tank and steam tank lid). Before
using for the first time clean the appliance as described in « Cleaning ».
PREPARING THE APPLIANCE FOR USE
Make sure that the plug is not plugged in and that the ON/OFF switch is positioned on 0.
Place the appliance on a level and non-slip working surface.
1. Fill the water bowl up to the MAX mark with water.
2. Place the steam tank on the water bowl. Pay attention to the four locking pins: they must engage
in the slots in the steam tank. Press the steam tank firmly onto the locking pins.
3. Put the hot dogs into the steam tank. Do not overfill the steam tank as the appliance may not
function properly and the hot dogs will not become hot.
4. Put the lid on the steam tank.
5. Insert the plug in a duly installed 230 V~50 Hz socket with earthing protection and press the
ON/OFF switch to 1. The cooking starts after approximately 2 minutes.
6. The hot dogs are ready after 8-10 minutes.
7. Stick the hot dog sandwiches on the pillar, cutting its extremity first. Warning! The spike is hot!
Danger of burning!
8. Remove the lid carefully from the steam tank. Take out the hot dogs from the steam tank with a
fork or a hot dog pincer.
9. After approximately 2 minutes, pull the sandwiches off the spike. Insert the hot dogs in the hole
in the sandwich.
10. Put other sandwiches on the spike and proceed as described above.
After use press the ON/OFF switch back to 0 and pull out the plug. Let the appliance cool down for
about 20 minutes and then clean as described in « Cleaning ».
CLEANING
Always pull out the plug and shift the ON/Off switch to 0 before cleaning.
Let the appliance cool down for about 20 minutes if it was used before as the handling of the hot
parts (spike, water bowl, steam tank) may cause burns.
Clean the appliance with a moist cloth.
do not dip the appliance in water!
The steam tank and the lid can be washed in a sink.
Do not use abrasive detergents!
Dry the entire appliance and all parts well after cleaning.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team HDM 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team HDM 2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info