Manual Team ft 14 (page 10 of 40) (English, German, Dutch, French, Italian, Portuguese, Spanish)

363809

Zoom out

Zoom in

1/40



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don‟t change the page numbering. Keep the

language integrity.

10 TEAM FT 14 - 070206

Assembly page 10/40

Fax +32 2 359 95 50

 If you wish to use solid fat, cut it into small pieces and place into the bowl. Turn the

temperature knob to its minimum position. Each time the pilot light goes out, turn the

temperature knob to a slightly higher temperature until all the fat has melted. Once all the

fat has melted, set the temperature knob to the desired cooking temperature. This type of

fat will solidify when the appliance cools down.

(*)

Competent qualified electrician: after sales department of the producer or importer or any

person who is qualified, approved and competent to perform this kind of repairs in order to

avoid all danger. In any case you should return the appliance to this electrician.

BEFORE USE

 When the fryer is new, the force of the lid spring is quite strong. After the fryer has been

used 10-15 times the spring force will reduce. This is quite normal.

 Remove all packaging from the unit.

 Before you use the deep fat fryer for the first time, we recommend that you clean the lid,

bowl, basket, handle and jacket of the deep fat fryer with warm soapy water with a soft

cloth. This will remove any residue left from the manufacture of this unit. See "Cleaning"

section.

DISASSEMBLING THE DEEP FAT FRYER

 Stand the appliance on a dry horizontal surface.

 Open the lid by pressing its opening button.

 Raise the handle and remove the basket.

 The bowl can also be removed to facilitate cleaning. Caution: wait until the oil or the

grease has totally cooled down before taking the bowl out of the appliance. If you are

using grease, use a plastic or wooden spatula to remove it in order not to damage the

coating of the bowl.

ASSEMBLING THE DEEP FAT FRYER

 Stand the appliance on a dry horizontal surface.

 Insert the bowl correctly in the appliance. If the bowl is not placed correctly, the

appliance will not work properly.

 Place the handle into the slot on the front of the fryer. Pull the handle release button

towards you and swing the handle down. This will allow you to lower the basket

completely into the bowl. To raise the basket, proceed inversely.

FIRST USE

 When using the appliance for the first time, pour the required amount of oil in the bowl,

making sure that the level is between the MIN and MAX marks indicated inside the bowl.

 We recommend that you use exclusively liquid oil that is suitable for deep fat frying. Check

the label on the bottle. If you wish to use a solid fat, cut the fat in small pieces. Plug in the

appliance, put the thermostat on the lowest position and add the fat pieces slowly. When

the fat has melted, set the thermostat to the desired temperature. WARNING: FAILURE TO

OBSERVE THIS WILL DAMAGE YOUR DEEP FAT FRYER.

SETTING THE TIMER

 Turn the thermostat knob to the desired position before setting the timer, otherwise the

timer will not work.

 Press the timer button to set the frying time; the minutes appear on the display.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team ft 14 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team ft 14 Manual

Product: