Manual Team DAT 1000 (page 8 of 36) (English, German, Dutch, French, Italian, Portuguese, Spanish)

713537

Zoom out

Zoom in

1/36



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

TKG DAT 1000 - 121017

Assembly page 8/36

Fax +32 2 359 95 50

FILLING THE WATER TANK

You can use demineralised water or tap water. If you use tap water, make sure you descale

the appliance regularly according to the amount of scale the water contains. If you want to

use the steam jet button, fill the water tank as follows:

1) Unplug the iron from the outlet to let it cool down and set it horizontally on a stable level

surface.

2) Turn the temperature dial to "MIN".

3) To fill the water tank, pour water through the fill opening using a measuring cup. Do not

overfill the water tank.

4) When ironing, unplug the appliance before refilling. Fill the water tank by holding the

appliance in horizontal position without putting down the hot sole plate, unless you have a

heat-resistant base.

TEMPERATURE SETTINGS

• You can choose the temperature setting according to the cloth that needs to be ironed.

• In order to turn the iron on, please turn the temperature knob clockwise into the required

position (see table below). In case of doubt, take a look at the garment label.

IRONING

Kind of textile Temperature dial

Nylon

Synthetic (e.g. acetate,

acrylic, viscose, polyamide,

polyester, …)

MIN



Silk

Wool



Cotton

Linen



MAX

• Fill the water tank.

• Plug in the appliance.

• Turn the temperature dial clockwise into the required position.

• Set the iron on its heel and wait until the temperature indicator goes out.

BURST OF STEAM

The burst of steam feature provides steam to remove stubborn creases.

To generate steam, you have to pump (press-release-press-release…) the steam jet button. No

steam comes out during the first 5 to 6 presses because the water needs to get to the

soleplate.

Caution: Set the temperature dial within the steam range ('' or ''). If the temperature

setting is too low, water may drip from the soleplate.

Check the garment label before ironing because some cloths may be damaged when

exposed to steam or water.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team DAT 1000 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team DAT 1000 Manual

Product: