486923

Team DAI 31 Manual

9
Zoom out
Zoom in
Previous page
1/28
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
        
language integrity.
9
Assembly page 9/28
Fax +32 2 359 95 50
Fill the water tank (variable steam dial on position).
Put the plug of the appliance into the power socket.
Turn the temperature dial clockwise into the required position.
Turn variable steam dial to the position for minimum steam or to the position for a
larger amount of steam.
Set the iron on its heel and wait until the temperature indicator goes out.
Caution: Set the temperature dial within the steam range. If temperature setting is too low,
water may drip from soleplate.
Check the garment label before ironing because some cloths may be damaged when
exposed to steam or water.
SPRAY
Produces a mist for removing stubborn creases.
Spray can be used at any temperature setting and during either dry or steam pressing.
Press down the spray button to spray.
BURST OF STEAM
The burst of steam feature provides additional steam for removing stubborn creases.
CARE AND CLEANING
Cleaning the inside parts of the iron is done by turning the steam dial into the
position and holding the iron horizontally for about one minute so steam can escape.
When you turn the variable steam dial into the , this goes up a little bit and you can
take it out.
There is no problem. YOU JUST HAVE TO PUT IT BACK IN ITS PROPER PLACE BEFORE EACH
USE. Therefore just keep it deep (in the good position) and turn it clockwise.
Caution, this cleaning function allows you to remove some scale particles but it does not
replace a full descaling.
To clean the plastic parts of the iron, use a humid cloth.
To clean the soleplate, make sure you use a product made especially for this purpose.
Never use abrasive products.
WHEN YOU HAVE FINISHED IRONING
Turn temperature dial to "MIN" and unplug iron from electrical outlet.
With soleplate facing away from you, turn iron upside down to empty water.
Then store the hot iron on its heel rest so that any remaining moisture will evaporate.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team DAI 31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team DAI 31 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info