486919

Team DAI 28 Manual

8
Zoom out
Zoom in
Previous page
1/30
Next page
Generated by Unregistered Batch DOC TO PDF Converter
2011.3.804.1511, please register!
Copies of the I/B. Please reproduce them without any changes
except under special instruction from Team International
BELGIUM. The page must reproduced and folded in order to
obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).
The page must be folded in order to keep the good numbering
when you turn the page of the I/B . Don‟t change the page
numbering. Keep the languages integrity.
8
Assembly page 8/30
Fax +32 2 359 95 50
FILLING THE WATER TANK
Only use demineralized water. If you want to use the steam/dry dial fill the water tank as follows:
1) Unplug the iron from the outlet to let it cool down and set it on a stable level surface.
2) Turn the temperature dial to "0" and variable steam/dry dial to the "0" setting.
3) Using a measuring cup, fill tank through the fill opening.
NOTE : never fill with anything but water.
TEMPERATURE SETTINGS
You can chose the temperature setting in function with the cloth to iron.
In order to turn the iron on, please turn the temperature knob clockwise into the required position.
DRY PRESSING
Turn on the iron.
Set temperature dial for the desired fabric.
NOTE: be sure to check the garment label for fibre content and set for the fabric requiring the lowest
temperature.
Turn the variable steam/dry dial on position "0".
Set iron on heel rest and wait until temperature indicator light goes out.
STEAM PRESSING
Fill the water tank (variable steam/dry dial on position "0").
Turn on the iron.
Turn the temperature dial clockwise into the required position.
Turn variable steam/dry dial on on the quantity you want.
Set the iron on its heel and wait until the temperature indicator goes out.
! Set the temperature dial within the steam range. If temperature setting is too low, water may drip
from soleplate.
! Check the garment label before ironing because some coths may be damaged when exposed to
steam or water.
SPRAY
Produces a mist for removing stubborn creases.
Spray can be used at any temperature setting and during either dry or steam pressing. Press down
the spray button to spray.
! Be sure to check the garment label for care instructions. Some fabrics may be damaged when exposed
to steam or water.
STEAMJET
The steamjet feature provides additional steam for removing stubborn creases.
CARE AND CLEANING
Cleaning the inside parts of the iron is done by turning the steam/dry dial into the
position and holding the iron horizontaly for about one minute so steam can escape.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team DAI 28 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team DAI 28 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info