Manual Team BL 11 (page 8 of 36) (English, German, Dutch, French, Italian, Portuguese, Spanish)

486899

Zoom out

Zoom in

1/36



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced

and folded in order to obtain a booklet A5 (+/- 148.5 mm

width x 210 mm height). When folding, make sure you

keep the good numbering when you turn the pages of

the I/B. Don’t change the page numbering. Keep the

language integrity.

8 TEAM BL 11 - 100402

Assembly page 8/36

Fax +32 2 359 95 50

 The appliance is designed for the preparation of small quantities of food, which have to

be consumed rather quickly. It is not designed for the preparation of large quantities at

once.

 Do not touch the blades while the appliance is operating and do not try to block their

movement in any way.

 Do not use the appliance without any food in it.

(*)

Competent qualified electrician: after-sales department of the producer or importer or any

person who is qualified, approved and competent to perform this kind of repairs in order to

avoid all danger. In case of need you should return the appliance to this electrician.

IMPORTANT INFORMATION

This appliance is not intended for professional use. You should follow the requested breaks.

Failure to follow this instruction carefully may result in damage to the motor. Please refer to the

rating label for the maximum continuous usage time (KB xx min where xx is the maximum usage

time). The breaks should last at least 10 minutes.

ATTENTION!

Your appliance is fitted with a security device on the pouring jug allowing the functioning of

the appliance only when the jug and its lid are correctly placed on the motor base. If those

conditions are met and the appliance does not start, call your after-sales service.

MOUNTING OF THE BLENDER AND USE

 Assemble the pouring jug on the motor block. You should place the symbol ▼ on the

pouring jug in front of the opened padlock  on the motor unit and then screw the

pouring jug to the motor unit, so that the closed padlock  ends up in front of the symbol

▼. To check if it has been done correctly, it should be possible to raise the motor block

with the handle of the pouring jug.

 Fill the pouring jug with the chosen ingredients.

 Put the lid on the pouring jug. Close the feeding hole of the lid with the cap. Make sure

the two small lugs of the cap enter into the two small slots of the lid and turn the cap

clockwise to lock it into place.

 Plug in the appliance.

 Select the speed that is most suitable for the ingredients you want to process.

 The button "P" allows a manual operation because you have to keep pushing it when

functioning. This position is generally used to crush ice.

 Press button 1 or button 2 (minimal speed) for mainly liquid ingredients.

 Press button 3 (medium speed) for combinations of liquid and solid ingredients.

 Press button 4 or button 5 (maximum speed) for mainly solid ingredients.

 It is also possible to add liquids or other ingredients anytime without stopping the

appliance. You only have to remove the stopper, which closes the lid opening, by turning

it anticlockwise and raising it straight up.

 Once you have finished the preparation, stop the appliance (button OFF) and unplug the

appliance.

 Unscrew the pouring jug. The symbol ▼ on the pouring jug should end up in front of the

opened padlock  on the motor unit.

 Remove the lid. Now you can serve the mixture.

 Caution: your appliance is not designed to mix hot preparations and the glass bowl could

break otherwise. If nevertheless you wish to prepare hot drinks or soups, let the whole cool

down to a temperature lower than about 60°C (tepid preparation) before pouring it into

the glass bowl. In case the lid would come up in spite of the precautions mentioned in

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team BL 11 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,82 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team BL 11 Manual

Product: