487962

Teac CD-RW890 Manual

18
Zoom out
Zoom in
Previous page
1/28
Next page
18
Recording (2)
S-LVL-60/50/40/30 (The track numbers are automatically
added)
The auto track function activates and “A-TRACK” appears. The
displayed number indicates the increment level.
The track numbers are automatically added during recording. If a
track change is detected via DIGITAL or if silence (lower than the
increment level) continues for three seconds or longer then the
next track starts (when sound becomes louder than the increment
level) via ANALOG, and the track numbers are automatically
updated.
* Increment level
Sound level to detect “silence” to add track numbers using auto
track when recording from external devices via ANALOG or to
perform synchronous recording for digital sources such as CD, MD,
and DAT.
This instruction manual describes “silence” as the situation where
the recording source level is lower than the specified increment
level.
−60, −50, −40, and −30 dB can be selected.
MANUAL (The track numbers are not automatically added)
In MANUAL mode, the track numbers are not automatically added.
To add track numbers manually, press the RECORD button.
The setting can be configured for DIGITAL and ANALOG respectively. <
When the power is turned on, the setting is –60dB for DIGITAL, and
–50dB for ANALOG.
The setting is stored until the power is turned off. <
If a CD is recorded via DIGITAL, the track numbers are added based <
on the CD's digital signals. There is usually no need to change the
increment level.
In digital recording, even if the auto track function is activated, <
track numbers may not be added depending on the digital source
player.
When you record digital broadcasts or other sources without <
track numbers, track numbers are not added even if the auto track
function is activated. To add a track number, press the RECORD
button while recording a track.
When you record classical music or other sources containing silent <
parts via ANALOG, track numbers may not be properly added even
if the auto track function is activated. To add a track number in this
case, deactivate the auto track function, and press the RECORD
button while recording a track.
When you record a record or other sources with much interference, <
more track numbers than expected may be added unintentionally.
The AUTO/MANUAL button cannot be used during recording. <
If track numbers are not properly added
When you record sources with interference via ANALOG, track
numbers may not be added if the increment level is lower than the
interference level. In this case, set the increment level higher than
the interference level.
If there is little interference and the track starts with a small sound
resulting in the beginning of the recorded track being truncated,
set the increment level lower.
4
Press the RECORD button.
and J indicators on the display will light, and the unit
enters the record pause mode.
No button will work while “WAITING” is displayed. Wait a few <
seconds until “WAITING” disappears from the display. When DIGITAL
is selected in step
2
, the sampling frequency of the digital source
( “ F S 4 4 _ 1K ” , “FS 48K” or “ FS 32K”) briefly appears after
“WAITING”.
“DIN UNLOCK” appears when the unit cannot perceive the digital <
signal. In that case, connect a digital device to the DIGITAL IN
terminal, switch it on, and wait a few seconds until the unit enters
the record pause mode.
You cannot record if “MONITOR” appears on the display. In that <
case, reload a recordable disc, wait a few seconds until “NO TOC”
and “CD-R” (or “CD-RW”) indicators light on the display, then press
the RECORD button again.
5
If necessary, adjust the recording level using the REC LEVEL
buttons.
The recording level can be adjusted only when “ANALOG” is
selected in step
2
.
The recording level is 0 dB when the power is turned on. Usually,
recording is possible even if the recording level has not been
adjusted.
CD-RW890_E_vA_unlocked.pdf 18 10/09/08 17:17
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teac CD-RW890 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teac CD-RW890 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teac CD-RW890

Teac CD-RW890 User Manual - German, Dutch, Italian - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info