487952
8
Zoom out
Zoom in
Previous page
1/36
Next page
Basic Operation
8
Power ON / OFF
Connect the power cord and signal cable of the unit.
Then, press the POWER button on the front panel to turn the unit on
[R]. The power indicator on the front panel is on and the unit is in
normal operating mode now.
To turn the unit off, press the POWER button on the front panel.
The button is set to the off position [E], and the power indicator and
eventually the unit are off. Disconnect the AC power cord from the
main outlet when the appliance is not used for a long period of time.
Input switching
To switch to the input port you want to use, press the corresponding
signal selector button on the front panel or the INPUT k or j button
on the remote control. The corresponding input status indicator will
light accordingly.
Volume adjustment
You can adjust the volume setting by using the VOLUME knob on the
front panel of the unit.
To increase the volume, turn the knob clockwise. To reduce the
volume, turn the knob counterclockwise.
You can also use the VOLUME + or button on the remote control to
adjust the volume.
Using the VOLUME knob or VOLUME + and – buttons, set the volume
to the minimum before turning on the unit each time and then
gradually increase the volume level to prevent damage to your
loudspeakers.
Output protection
When the output of the power amplifier is overloaded, the relay of
the protection circuit of the power amplifier will be disconnected at
once. All indicators on the panel will be on at the same time and the
volume will be turned down automatically. At this time, turn off the
unit's power and eliminate any overload cause. In about 5 minutes,
turn on the unit again to check for normal operation.
A/B SPEAKER selection
Press the [A SPEAKERS B] button on the front panel or remote control,
then choose A or B selector output. If A and B indicators on the panel
both on which means A and B speakers both have output. If A or B
indicator on the panel is on, the other speaker is off.
Mute
Press the MUTE button on the remote control to mute the sound
output from the connected loudspeaker systems. While the sound is
muted, the input status indicator for the selected input source blinks.
In mute mode, press the MUTE button on the remote control again to
return to normal playback mode.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Teac AI-2000 Distinction at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Teac AI-2000 Distinction in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Teac AI-2000 Distinction

Teac AI-2000 Distinction User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info