766622
7
Zoom out
Zoom in
Previous page
1/112
Next page
7
1. Power button – press the on the control panel or the remote control to turn the air
conditioner on and o. Never turn the appliance o by unplugging from the power source.
Always press the power button, then wait for a few minutes before unplugging. This allows the
appliance to perform a proper shutdown.
2. Cool Mode – press the on the control panel or remote until the Cool mode is lit. Select
the target temperature 64°-90° F (18°-32° C) by pressing the or button until the
corresponding value is displayed. Select the required fan speed by pressing the fan
speed button.
3. Dry Mode – press the on the control panel or remote until the Dry symbol appears, “dh” will
appear on the screen. In this model, the default fan speed is low, and cannot be modified.
4. Fan Mode – press the on the control panel until the Fan symbol appears. You can then
select your desired fan speed, either High or Low .
5. Sleep Mode - press the SLEEP button on the remote control (there is no sleep mode on the
control panel). This function is useful when you are sleeping as it gradually reduces operation
of the appliance. To set this function correctly, select the cool or dry mode as described above.
Press the button. The appliance operates in the previously selected mode.
When you choose the sleep function, the brightness of the screen is reduced and fan speed
is lowered.
The SLEEP function maintains the room at optimum temperature without excessive fluctuations
in either temperature or humidity with silent operation. Fan speed is always at Low, while room
temperature and humidity vary gradually to ensure comfort.
When in COOL mode, the selected temperature will decrease by 1° per hour in a 2 hour period.
This new temperature will be maintained for next 6 hours and then the appliance will turn o. The
SLEEP function can be canceled at any time during operation by pressing the “Sleep”, “Mode” or
“Fan Speed” button.
In FAN or DRY mode, SLEEP function cannot be set.
1. Directional Louvers – Control the direction of the
air flow by manually adjusting the deflectors to the
desired direction. In shipping, the vents are closed
and must be opened by pushing on the bottom left
hand corner deflector to open.
Note: The Louver Swing Button is on the remote,
however that feature is not available on this model.
Setting the Timer using the control panel or remote control
Programming Start Up –
Turn on the appliance, choose the mode you want, for example cool, 72°F, high fan speed.
Turn o the appliance.
Press the Timer button, the symbol and the screen will display 1-24 hours.
Press several times until the corresponding time is displayed.
Wait about 5 seconds, the timer will be active, then the “Timer” symbol is displayed on
the screen.
Press the Timer button again, the timer will be canceled, and the “Timer” symbol will disappear
from screen.
AB
Horizontal
Deflector Vertical
Deflector
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TCL TPW08CR19 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TCL TPW08CR19 in the language / languages: French, Spanish as an attachment in your email.

The manual is 22,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info