794261
9
Zoom out
Zoom in
Previous page
1/32
Next page
6
EMERGENCY FUNCTION & AUTO-RESTART FUNCTION
Remark: the external static pressure of heat pumps is 0 Pa for all models.
The shape and position of the emergency button
may be different according to the model, but their
function is the same.
ON/OFF
Emergency
button
The emergency button in some models could be on
the right part of the unit under the front panel.
The appliance is preset auto - restart function by
manufacturer. In case of a sudden power failure, the
module memorizes the setting conditions before the
power failure. when the power restores, the unit
restarts automatically with all the previous settings
preserved by the memory function.
Open and lift the front panel up to an angle to reach the
emergency button.
1. One press of the emergency button(one beep) will
lead to the forced COOLING operation
2. Two press of the emergency button within 3 sec
(two beeps) will lead to the forced HEATING
operation.
3. To switch off the unit , you just need to press the
button again ( a single long beep) .
4. After 30 minutes in forced operation , the air
conditioner will automatically start working in 23
cooling mode, auto fan speed.
* The FEEL function is described in page 13.
If the remote controller fails to work or maintenance
necessary, proceed as follows:
display PCB
front panel
To deactivate the AUTO-RESTART function ,pro-
ceed as follows:
1. Switch the air conditioner off and remove the
plug.
2. Press the emergency button meanwhile plug
it in.
3. Keep pressing the emergency button for more
than 10 seconds until you hear four short beeps
from the unit. The AUTO-RESTART function is
deactivate.
To activate the AUTO - RESTART function ,
follow the same procedure until you hear three
short beeps from the unit.
Emergency
button
ON / OFF
POWER
SLEEP
TIMER
RUN
EMERGENCY FUNCTION
AUTO-RESTART FUNCTION
Emergency
button
ON/OFF
front panel
1033A
The indoor fan speed during capacity and or efficiency test should be "quick cool" or "quick heat"
which can be activated by pressing "TURBO" or "SUPER" button of remote controller; Please contact
with the seller in case of failing in activating it.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TCL TCLSS18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TCL TCLSS18 in the language / languages: English as an attachment in your email.

The manual is 2.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info