Manual TCL SW1000B (page 16 of 76) (English, German, French, Italian, Spanish)

793928

Zoom out

Zoom in

1/76

- 12 -

After closing the upper cover, push the dustbin into the main machine (make sure the dustbin is fully

inserted until it buckles into the right place).

⑦

2. Cleaning of roller brush (roller brush are replaceable)

Foreign substances such as hair is easy to adhere to roller brushes. Roller brush may be damaged

if there is too much foreign substances on them. It is recommended to clean them once a week.

Turn the main machine over (with the bottom shell facing upwards), hold the buckle with both hands,

lift it up, and take out the brush cover.

Use your ﬁngers to hold the bearing far away from the switch, and take the other end of the support

holder, and take out the roller brush upwards.

Use cleaning tools to clean the hair and other dirt on the roller brush slot.

Roller brush installation/new roller brush replacement: Insert one end of the roller brush square bearing

seat into the corresponding square slot of the roller brush slot and slide into place (reverse installation

does not work).

Make sure the main brush is aligned properly in the robot and then fasten the roller brush cover

downward.

①

②

③

④

⑤

① ② ③④ ⑤

3. Cleaning of side brushes (side brushes are replaceable)

Foreign substances such as hair is easy to adhere to side brushes. side brushes may be damaged

if there is too much foreign substances on them. It is recommended to clean them once a week.

With the bottom shell of the main machine facing upwards, pull out the side brush forcefully;

Use a cleaning tool to clean up the dirt on the side brush and the slot, and the hair on the side brush

can be cut oﬀ with a cleaning tool (dry brushing works, washing doesn’t work).

Reinstall the side brush/new side brush replacement: hold one corner of the side brush, and the other

side against the corresponding buckle, press the side brush down into the slot.

①

②

③

① ② ③

4. Cleaning of sensor

Foreign substances may adhere to the sensors on the bottom and side rear of the robot. If too much

foreign substances adhere to the sensor at the bottom of the robot, the robot may fall oﬀ ledges. It is

recommended to clean the sensors once a week.

Please gently wipe each sensor cover with a soft dry cloth, including:

(1) Wall sensors on both sides of the robot;

(2) Front infrared anti-collision sensors;

(3) 3 anti-fall sensors on the bottom side;

◆

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TCL SW1000B in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 21.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TCL SW1000B Manual

Product: