766568

TCL RP318BXE0 Manual

11
Zoom out
Zoom in
Previous page
1/16
Next page
EN
9
Power on for the first time
The first time the power is turned on, the refrigerator operates according to the refrigerator room at 5 ° C,
and in the freezer at -18 ° C.
Child lock function
On: When there is no key operation in the display within 30 seconds, the child lock icon on the display lights
up, and the remaining characters go out, and the child lock function is entered immediately. After 5 minutes,
the child lock icon goes out and enters the display protection function. In the screen saver mode, Press any
key to exit the screen saver mode.
Close: When the child lock of the display is turned on, press and hold the "Unlock for 3 seconds" button for
3 seconds to unlock, that is, the child lock function is turned off.
Refrigerating chamber temperature adjustment
In the unlocked state, repeatedly press the “Fridge” key to adjust the temperature of the refrigerating
chamber. The setting temperature for refrigerating chamber cycles among “2” → “4” → “6” → “8” → “OFF”
→ “Power Cool” → “2”. Stop the key operation after an appropriate temperature is selected and wait for 5
seconds, the confirmation for temperature setting is completed. (The setting temperature of “OFF” for the
refrigerating chamber indicates the refrigeration turn off function. After the refrigeration turn off function is
enabled, the refrigerating chamber will stop refrigerating.)
Freezing chamber temperature adjustment
In the unlocked state, repeatedly press the “Freezer” key to adjust the temperature of the freezing
chamber. The setting temperature for freezing chamber cycles among “-15” → “-17” → “-19” → “-21” → “-
24” →“Power Freeze” → “-15”. Stop the key operation after an appropriate temperature is selected and
wait for 5 seconds, the confirmation for temperature setting is completed.
Power Cool function
Under "Power Cool" state, the "Power Cool" icon lights up, and the refrigerator compartment runs at 2°C
until the function exits. It will automatically exit after 2 hours after entering "Power Cool". Under “Power
Cool” state, you will automatically quit the power cool function when the refrigerating door is opened over
3 minutes.
Power Freeze function
Under "Power Freeze" state, the "Power Freeze" icon lights up and the freezer runs at -24°C until the
function exits. It will automatically exit 4 hours after entering "Power Cool".
Smart function
In the unlocked state, press and hold the "Fridge" button for 3 seconds to enter the smart function,
and the "smart" icon will light up You can quit the smart function with the same operation.
When the smart function is enabled, the refrigerator will realize self-monitor for the state of each
compartment, so as to run with the most effective way. Under the smart state, the refrigerator
many automatically enter “Power Cool” or “Power Freeze” function according to the temperature
rise in the refrigerating and freezer chamber.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TCL RP318BXE0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TCL RP318BXE0 in the language / languages: English as an attachment in your email.

The manual is 2,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info