794199
10
Zoom out
Zoom in
Previous page
1/33
Next page
9
Chapter 4 Using More of Your TV
The CAM may enable several digital services,
depending on the operator and services you choose
(for example, pay TV). Contact your digital TV service
operator for more information about services and terms.
Using the Common Interface Function
WARNING: Switch off your TV before inserting a
CAM. Be sure to follow the instructions described
below. Wrong insertion of a CAM may damage both
the module and your TV.
1. Following the directions printed on the CAM, gently
insert the module into the common interface slot on
the TV.
2. Push the module in as far as it will go.
3. Turn on the TV and wait for the common interface
function to be activated. This may take several
minutes.
Note: Do not remove the CAM from the slot. Removing
the module will deactivate the digital services.
Accessing Common Interface Services
After inserting and activating the CAM, press Menu
on the remote control, select Channel > Common
Interface and press OK/ to enter. This menu option
is only available if the CAM is correctly inserted and
activated. On-screen applications and content are
provided by your digital TV service operator.
Note: This feature is only available for digital channels.
Using Subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-C
digital broadcasts. With digital broadcasts, you have
the additional option of selecting a preferred subtitle
language.
Turning On/Off Subtitles
1. Press Menu on the remote control, select Setup >
Subtitle and press OK/► to enter.
2. Press ◄/► to select On or Off.
3. Press Exit to close the menu.
Enabling Subtitle Languages on Digital TV Channels
1. Press Menu on the remote control, select Setup >
Subtitle and press OK/► to enter.
2. Press / to select Subtitle Primary Language,
and then press ◄/► to select a language as your
preferred language.
3. Press/ to select Subtitle Secondary Language,
and then press ◄/► to select a secondary subtitle
language.
4. Press Exit to close the menu.
Installing Channels
This section describes how to search and store
channels automatically. This may be done in any of the
cases below:
-you have skipped the channel search step in the
initial setup;
-you are prompted that there are no channels in TV
mode;
-you want to update your channels.
Auto Scan
Scanning CH47
Digital Channels Found:
DTV: 0 Radio: 0 Data: 0
Analog Channels Found: 0
MENU:Skip EXIT:Exit
1. In TV mode, press Menu
on the remote control and
select Channel > Tuner Type, then press ◄/► to
select Cable, Antenna or Satellite.
2. Select Auto Scan and then press OK/► to enter.
3. Set Country and Mode (DTV+ATV, DTV or ATV),
press ▲/▼ to highlight Start, and then press
OK/► to start the automatic search process. The
search process may take a few minutes. During the
process, you can press Exit to abort halfway.
Once the scan ends, the TV automatically goes to
the first channel searched, and all the channels are
arranged in a preset order.
Channel Edit
This allows you to skip channels, modify the preset
order, delete, or rename (only in ATV) channels.
1. Press Menu on the remote control, select Channel
> Channel Edit.
2. Press ▲/▼ to highlight a channel, and then press
the colored buttons to perform the corresponding
function indicated at the bottom of the screen.
Automatic Channel Update
This allows you to update all available channels, without
altering the sorting of existing channels.
Note: This feature is only available for digital channels.
1. In DTV mode, press Menu
on the remote control
and select Channel > Auto Channel Update.
2. Press ◄/► to select On to enable automatic
channel update.
Common Interface
(* not available for some models)
Encrypted digital TV channels can be decoded with a
Conditional Access Module (CAM) along with a smart
card provided by a digital TV service operator.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TCL LED43D2910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TCL LED43D2910 in the language / languages: English as an attachment in your email.

The manual is 8.99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info