Manual TCL L50S5600FS (page 13 of 20) (English)

794212

Zoom out

Zoom in

1/20

OK/

Network update: press MENU, then select Options >

Network update. Select On/Off to enable or disable the

network update function.

- When this function is on, the TV will automatically

update channels if your DTV service provider updates

their DTV network.

- When this function is off, you need to run the channel

Search again to get new channels or remove

unavailable channels if your DTV service provider adds

or removes channels from their DTV network.

Location: use to select Home or Shop mode. Home

mode is the default. If Shop mode is selected, the picture

will be displayed in Dynamic mode. In Shop mode, you

can adjust the picture mode, but when turning on the TV

next time, the Picture preset will restore to Dynamic

mode, and a prompt about Shop mode will appear.

Software update: press MENU, the select Options >

Software update. Press to enter.

- By network: enables you to download and install the

latest software version from the internet. Make sure to

set up a wired or wireless network connection first

then select By network and press to enter. When

new-version software is available, a progress bar

appears. When the download finishes, the TV will go

black and upgrade the software.

Note: Do not switch off or unplug the TV until the

upgrade is completed. Keep successful network

connection during upgrade.

- By channel: enables you to install the latest version of

the software if available from the broadcast. Use to

select By channel and press to enter.

1. Use to select Yes under Auto download to

automatically download the latest software if

available. After the software has been downloaded

successfully, you will be prompted to decide if you

want to install it right now. If yes, follow the on-screen

instructions to complete your installation. You can

also select to ignore the installation here.

2. Use to select No under Auto download to

decline the automatic download.

3. Use to select Manual Download and press

if you wish to search manually for the latest

software. Follow the on-screen instructions to

complete. During the search, press OK/EXIT to

cancel or exit the process.

Customising the input settings

You can configure your TV according to the equipment

you connect to it.

1. Select Setup > Input settings.

2. Press to enter Input settings.

3. Press to select a connector your equipment is

connected to.

4. Press to select the type of apparatus attached to

OK/

this connector.

5. Press Menu to return to the Setup menu. After

configuring, the selected source label will be

displayed after the name of the related connector in

the source list when pressing Source on the remote

control or OK on the TV set.

Diagnostics on digital TV channels

1. Select Setup > Diagnostics.

2. Press to display some signal information on

current digital channel, e.g. signal strength, freq.(KHz).

Time shift

Allows you to record the TV programme so that you won't

miss the favourite part even if you go out. Before you use

the function, connect a USB drive to the TV first. For the

first time, you should do the disk setup for the USB drive.

1. Select Setup > Time shift.

2. Press to select On to switch on the time shift

function, then press Exit to close the menu.

3. Press Option on the remote control and select Time

shift, then press OK to confirm.

4. Follow the directions on the screen to do the setup.

5. After the disk setup is done, press Option and select

Time shift.

6. Press OK to display the time shift menu. Press and

OK to control the time shift process.

- When the time shift menu disappears and only the

timing of the time shift remains on the screen, you

can press OK to call out the time shift menu.

Notes:

- Before you plug the USB drive to TV, make sure you

have backed up the data on the drive to avoid

unforeseen malfunction and data loss.

- We recommend that you use a USB drive with at

least 1GB free space and a disk speed faster than

5.0MB/sec.

- The bigger the USB drive free space for time shift, the

bigger the recording length.

- If you attempt to change channel during time shift, a

message prompts you to select Yes or No. You can

select Yes to exit the time shift function and execute

the channel change.

Reset shop

Allows you to reset the TV to factory default settings.

1. Select Setup, then press OK to confirm.

2. Select Reset shop and press to enter.

3. Use the digit buttons to enter the password.

4. Press to select OK and press OK to confirm.

5. The Initial setup menu appears. Follow the related

Instructions.

OK/

Menu Operation

OK/

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TCL L50S5600FS in the language / languages: English as an attachment in your email.

The manual is 1.62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TCL L50S5600FS Manual

Product: