794185
22
Zoom out
Zoom in
Previous page
1/24
Next page
Figures and illustrations in this User’s Guide are
provided for reference only and may dier from
actual product appearance. Product design and
specications may be changed without notice.
OPERATION MANUAL
For use with models: H9510FDS series/H9600CDS series
2
Table of Contents
Chapter 1: Safety Information
Precautions ....................................................................................................................................... 3
Product ........................................................................................................................................... 3
Power and Plug .............................................................................................................................. 3
Power Cord and Signal Cable ........................................................................................................ 3
Use Environment ............................................................................................................................ 3
Cleaning ......................................................................................................................................... 3
Hanging the TV Set on the Wall ..................................................................................................... 3
Important Information ...................................................................................................................... 3
Chapter 2: Connections and Setup ......................................................................................... 4
Buttons on the TV ............................................................................................................................. 4
Sockets .............................................................................................................................................. 5
Remote Control Functions .............................................................................................................. 6
Network Connection ......................................................................................................................... 8
Switching on ..................................................................................................................................... 9
Switching off ..................................................................................................................................... 9
Initial Set-up ...................................................................................................................................... 10
Chapter 3: Homepage
Using Homepage-APP ....................................................................................................................... 11
Using Homepage-TV ......................................................................................................................... 12
Using Homepage-GOLIVE ................................................................................................................ 13
Chapter 4: Menu Operation
Using Quick Access Menu ............................................................................................................... 14
Picture Preset ................................................................................................................................. 14
Sound Preset .................................................................................................................................. 14
Picture Freeze ................................................................................................................................ 14
T-Link .............................................................................................................................................. 14
Time Shift ....................................................................................................................................... 14
PVR ................................................................................................................................................ 14
Schedule List .................................................................................................................................. 15
Settings ........................................................................................................................................... 15
Using System Settings ..................................................................................................................... 16
Picture ............................................................................................................................................ 16
Sound ............................................................................................................................................. 16
Channel .......................................................................................................................................... 17
Network .......................................................................................................................................... 17
System ............................................................................................................................................ 18
Applications .................................................................................................................................... 19
Chapter 5: Advanced Functions
Using the 3D Function ..................................................................................................................... 20
Using E-Manual(Help) ...................................................................................................................... 20
Using MHL Function(Mobile High-denition Link) ........................................................................ 20
Viewing photos, playing music and watching videos from a USB device .................................. 21
Chapter 6: Other Information
Problems and Solutions ................................................................................................................... 22
Troubleshooting ............................................................................................................................... 23
Legal Statement ................................................................................................................................ 24
Licence .............................................................................................................................................. 24
3
Chapter 1 Safety Information
Precautions
Read all of the instructions before operating the set.
Keep these instructions well for future use.
Product
• Do not block or cover the ventilation openings on
the back cover.
• Do not push objects of any kind into this unit through
the cabinet slots as they could touch current carrying
partsorshort-circuitparts,resultinginre,electric
shock, or damage to the unit.
• Do not attempt to open the cabinet as this may
cause damage. There are no parts inside you can
servicebyyourself.Referallservicingtoqualied
personnel.
• Donottouchthescreensurfacewithngersasthis
may scratch or mark the TV screen.
• Do not impact the TV screen with hard pressure as
this may damage the TV screen severely.
• The appliance is not intended for use by young
childrenorinrmpersonswithoutsupervision.
Young children should be supervised to ensure that
they do not play with the appliance.
Power and Plug
Unplug the set under the following conditions:
- If the set will not be used for a long period of time.
- If the power cord or the power outlet/plug is
damaged.
- Follow the instructions to install and adjust the
product. Adjust those controls that are covered
in these operating instructions as improper
adjustment of other controls may result in damage.
If this happens, unplug the set and refer to the
service personnel.
- If the set is subject to impact or has been dropped
and the cabinet has been damaged
Where the mains plug or an appliance coupler is
used as disconnect device, the disconnect device
shall remain readily operable.
Power Cord and Signal Cable
• Donotallowanythingtorestonorrolloverthe
power cord and the signal cable.
• Protectthepowercordandthesignalcablefrom
being trampled.
• Donotoverloadthepowercordorthepoweroutlet.
• Donotexposethepowercordandthesignalcable
to moisture.
Use Environment
• Donotplacethesetonanunstablecart,stand,or
table.
• Placethesetonaplacethatallowsgoodventilation.
• Donotusethesetneardamp,andcoldareas.
Protect the set from overheating.
• Keepthesetawayfromdirectsunlight.
• Theapparatusshallnotbeexposedtodripping
orsplashingandnoobjectslledwithliquids,such
as vases, shall be placed on the apparatus.
• Do not use the set in dusty environments.
• Operating Temperature: 5 to 35(41°F to 95°F)
Operating Humidity: 20% to 80%,non-condensing
Storage Temperature: -15 to 45(5°F to 113°F)
Storage Humidity: 10% to 90%,non-condensing
Cleaning
Dust the set by wiping the screen and the cabinet
with a soft, clean cloth or some special liquid
cleaner.
Donotapplyexcessiveforcetothescreenwhen
cleaning.
• Do not use water or other chemical cleaners to
clean the screen as this may damage the surface of
the TV screen.
Hanging the TV Set on the Wall
Warning: This operation requires two people.
To ensure a safe installation, observe the following
safety notes:
Check that the wall can support the weight of the TV
set and wall mount assembly.
• Follow the mounting instructions provided with the
wall mount.
• The TV set must be installed on a vertical wall.
• Make sure to use only screws suitable for the
material of the wall.
• Make sure that the TV set cables are placed so that
there is no danger of tripping over them.
All other safety instructions about our TV sets are also
applicable here. Wall Mount Bracket not included.
Important Information
Ifatelevisionisnotpositionedinasufcientlystable
location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided
by taking simple precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television.
• Only using furniture that can safely support the
television.
• Ensuring the television is not overhanging the edge
of the supporting furniture.
• Not placing the television on tall furniture (for
example,cupboardsorbookcases)without
anchoring both the furniture and the television to a
suitable support.
• Not standing the television on cloth or other
materials placed between the television and
supporting furniture.
• Educating children about the dangers of climbing on
furniture to reach the television or its controls.
Note: Graphics contained within this publication
are presentation only.
4
Buttons on the TV
1. PR-/+ (PROGRAMME DOWN/UP) buttons
Scans down/up through the channel list. In the menu system, PROGRAMME DOWN acts like the down direction
button on the remote and adjusts menu; PROGRAMME UP acts like the up direction buttons on the remote and
adjust menu controls.
2. VOL-/+ (VOLUME DOWN/UP) buttons
Decreases/increases the volume. In the menu system, they act like the left/right direction buttons on the remote
and adjust menu controls.
3. Home ( ) button
DisplaysorexitstheHomepage.
4. OK button
Conrmsyourselectionorentersthenextscreen.
5. POWER ( ) button
Switches the TV on or to standby. (Note: for some models, the POWER button turns the TV on or off.)
Note:
The location and names of the function buttons and power button on the TV may vary according to TV model.
Chapter 2 Connections and Setup
For some models, there's only one TV button--TV Controller.
TV Controller
TV Controller is a multi directional button that helps navigate without remote control.
Note: The product colour and shape may vary depending on the model.
TV controllerThe on-screen NAV menu
1.
Turns the TV on by pressing the Controller when the TV is in standby
mode.
In the menu system, press and release it within 2 seconds, it acts like
OKbuttonontheremotetoconrmyourselection.
When the power is on, press and hold the TV Controller more than 2
seconds and then release, the NAV menu will display on the screen;
When NAV menu is visible, you can highlight the shortcuts by moving
the Controller up/down/left/right, and press the Controller to enter, and
then operate according to the on-screen display.
ToexittheNAVmenu,pressandholdtheTVControllermorethan2
seconds and then release.
2.
Scans up/down through the channel list. In the menu system, they act
like the UP/DOWN direction buttons on the remote and adjust menu
controls.
3.
Adjusts the volume by moving the Controller left and right. In the menu
system, they act like the RIGHT/LEFT direction buttons on the remote
and adjust menu controls.
5
Connections and Setup
VIDEO
R
L
AV OUT
AUDIO
AV OUT adapter
or
ANTENNA IN
LAN
HEADPHONE
or
SPDIF or
Sockets
Note: The location and names of the sockets on the TV may vary according to TV model, and not all sockets are available on all models.
USB 3.0 or
USB 2.0 or
USB 2.0/SERVICE
HDMI 1(MHL) or
HDMI 2 or
HDMI 3 or
HDMI 4(ARC)
Y
PB
PR
COMPONENT
IN
CMP IN(YP
B
P
R
)
adapter
or
R
L
COMPONENT
AUDIO IN
CMP AUDIO IN
adapter
or
USB 3.0 or USB2.0 or USB 2.0/SERVICE socket (input)
These sockets can be used to connect a USB device.
Note: The number of USB sockets on the TV may vary according to TV model.
HDMI1(MHL) or HDMI2 or HDMI3 or HDMI4(ARC) socket (input)
TheHDMI(High-DenitionMultimediaInterface)socketcanbeusedtoconnectaBlu-
ray player, PC with a compatible video card installed, certain DVD players or a high-
denitioncompatibledigitalsatellitedecoder.Thissocketprovidesanuncompressed
digital connection that carries both video and audio data by way of an integrated mini-
plug cable.
Note: Only HDMI sockets with the MHL identication will support the MHL function,
MHL stands for Mobile High-denition Link, and allows you to link an MHLcapable
mobile device to the television.
CMP IN (YPBPR)adapter socket (input)
The CMP adapter socket can be used to connect the attached CMP adapter cable with
YPbPr component sockets. These YPbPr sockets can be used to connect a device
that has component video sockets, such as a DVD player. The component sockets
can recognize if the device you're connecting to is Y Pb Pr compatible. The component
socketsprovideexcellentpicturequalitybecausethevideoisseparatedintothree
independent parts.
CMP AUDIO IN adapter sockets (input)
The CMP AUDIO IN adapter socket can be used to connect the attached AUDIO in
adapter cable with audio L & R sockets, and be used to obtain sound. These AUDIO IN
L & R sockets can be used to connect a range of equipment, including video recorders,
camcorders, satellite receivers, DVD players, or games consoles.
AV IN adapter socket
The AV IN adapter socket can be used to connect the attached AV adapter cable
with VIDEO and AUDIO L & R IN sockets. The AV IN sockets can be used to connect
a range of equipment, including video recorders, camcorders, decoders, satellite
receivers, DVD players, or games consoles. The VIDEO IN socket provides composite
video connection.
AV OUT adapter (output) socket
The AV OUT adapter socket can be used to connect the attached AV adapter cable
with VIDEO and AUDIO L & R OUT sockets. These AV out sockets can be used to
connect a VCR to record programmes. You must leave the TV on the same channel
you are recording. The VIDEO OUT socket provides composite video connection.
ANTENNA IN socket (input)
This socket can be used to connect the outside aerial or cable network.
LAN
RJ45plugforconnectingtoexternalmodemornetworkaccessequipment.
Headphone socket (output)
This socket can be used to connect headphones or stereo earphones.
Warning: Excessive sound pressure from earphones and headphones can cause
hearing loss.
SPDIF socket (output)
The SPDIF socket can be used to connect a compatible digital audio receiver.
L
AUDIO
VIDE O
AV IN
R
or
AV IN adapter
6
Remote Control Functions
Most of your television's functions are available via the menus that appear on the screen. The remote control supplied
withyoursetcanbeusedtonavigatethroughthemenusandtocongureallthegeneralsettings.
Note: Figures and illustrations in this operation manual are provided for reference only and may differ from actual
product appearance. Please pair remote before using MIC and Mouse function.
Standby / quit standby.
MIC The area to input voice control.
0-9
buttons
To enter channel numbers; to enter a letter, a digit or a symbol
in some functions.
TV To access TV mode.
GUIDE To toggle the Electronic Programme Guide on or off (only
available for digital channels).
V+/- To control the volume.
To mute and un-mute the sound.
LIST Todisplayorexitthe channel list.
P+/- To adjust channels.
SOURCE To enter source selection interface.
APP Quick access to APP store.
HISTORY To show or hide history list.
VOICE Press and hold button to speak, you can control the TV by
TCL voice, Voice interactive and Voice control (It needs a nor-
mal network connection)
INFO To display programme information, if available.
MOUSE To turn the mouse function on and work as OK button for
conrmation.
OK Toconrmanentryorselection;toactastheleftmousebutton
when MOUSE function is on; to access the virtual keyboard when
doing input.
To navigate through the menus; to select menu options; to switch
tothepreviousornextphoto,songorvideoinUSBfunction.
To navigate through the menus; to set functions and change
values. can also be used to open the corresponding submenu.
MENU
To access the options menu; to move the highlight on the tab in
browser.
HOME Toenter/exitHomepage.
BACK To return to the previous channel in TV mode; to go back to the
previous menu or interface.
Lang To select a sound type available for selected analogue
TV programme; to select an audio language available for
selected digital TV programme.
SUBTITLE To select a subtitle language available for selected digital TV
programme.
Connections and Setup
7
Note:
1. This remote control is equipped with general functions of infrared remote control and wireless remote control. MOUSE
and VOICE keys are only available after pairing the remote control. When pairing the remote control, please refer to the
prompt on-screen instructions when you press these two keys.
2. Air mouse function requires more battery power than standard remote functions. Heavy users of this feature may
experience shortened battery life.
3. GUIDE and REC( ) are valid when DTV signal is available.
Connections and Setup
TEXT TotoggleTeletextonoroff.
ZOOM Quick access to the picture format selection menu.
Note: You are recommended to use the full screen (16:9 format) mode.
Do not use the display mode with black bars on both sides of the picture
(such as 4:3) for a long time; otherwise the TV screen may be damaged
permanently.
3D Quick access to 3D console.
SLEEP Quick access to the sleep timer setting menu.
Recording button.
To start playback.
To pause playback
◄◄ To start fast reverse.
To stop playback.
►► To start fast forward.
Colour
buttons
ToselecttasksorTeletextpages.
8
Connecting to a wireless network
To connect to a wireless network
1. Ensure you have:
•
A router broadcasting a high-speed wireless signal
•
A high-speed internet connection
•AwirelessUSBAdapter(notneededifyourTVhasa
built-in wireless Adapter).
2. Remember to connect your wireless USB Adapter to
your TV's USB port.
3. Use the Network SettingstoconguretheTV.
Note:
For models with a built-in wireless adaptor, the USB
wireless adaptor is not required. Not all wireless adaptors
are compatible with this TV.
Wireless Router
Modem
TV Set
Wireless
USB Adapter
Wireless Router
Modem

USB
port on the
back panel
TV Set
Network Connection
To access the internet, you must subscribe to high speed broadband internet service from your internet service
provider.
Your TV can be connected to your home network in two ways:
•Wired,usingtheRJ45(LAN)connectoronthebackpanel.
•Wireless,usingtheinternalwirelessorexternalwirelessUSBadapterandyourhomewirelessnetwork.
Note: following instructions are just the usual ways to connect your TV to the wired or wireless network. The
connection method may be different depending on your actual network conguration. If you have any questions about
your home network, please refer to your ISP(Internet Service Provider).
Connecting to a wired network
To connect to a wired network:
1. Ensure you have:
•AnethernetcablelongenoughtoreachyourTV
•ArouterormodemwithanavailableEthernetport
•Ahigh-speedinternetconnection
•AnEthernet (LAN) port on the back of the TV
2. Connect your ethernet cable to the router and to the
Ethernet port on the back of the TV.
3. Use the Network SettingstoconguretheTV.
Connections and Setup
9
3. Connect the outside aerial or cable network to the ANTENNA IN socket at the
back of the TV set.
The aerial socket (75 OHM - VHF / UHF / cable) can be used for connecting
anexternalaerialorotherequipmentttedwithamodulator(videorecorder,
satellite receiver, etc.). We recommend that you do not connect other
equipment (video recorder, satellite receiver, etc.) to your TV set to begin
with, so as not to complicate the set-up procedure with the additional steps
involved.Connectthemwhenyouhavenishedsettingupthechannels.
4. When powered on, the TV will be turned on directly or be in standby mode.
If the TV set is in standby mode, press the standby button on the remote
control or on the TV set to turn on the TV.
Note: The location and name of the power button on the TV may vary
according to TV model.
Connections and Setup
Switching off
To put the TV set into standby mode, press on the remote control or on the TV, the TV set remains powered up,
but with low energy consumption.
To switch off the TV set, disconnect the mains plug from the mains outlet.
Switching on
Follow the instructions on this page on how to switch on your TV set and the remote control before going on to follow-
ing pages describing how to use the channel set-up procedure.
1. Insert three AAA batteries in the remote control.
Precautions on using batteries:
-Onlyusethebatterytypesspecied.
- Make sure you use the correct polarity.
-Donotmixnewandusedbatteries.
- Do not use rechargeable batteries.
-Donotexposebatteriestoexcessiveheatsuchassunshine,reorsimilar,throwtheminare,rechargethem
ortrytoopenthem,asthiscouldcausethemtoleakorexplode.
- Remove the batteries from the remote control if you are not using it for a long period of time.
2.Connectthepowercabletoamainssocket.(Ifthepowercableisnotconnectedtothetelevision,pleaserst
connect the power cable to the television.) Your TV set should only be connected to an AC supply. It must not be
connected to a DC supply. If the plug is detached from the cable, do not, under any circumstances, connect it to a
mains socket, as there is a risk of electric shock.
Note: The gures are for representation only. The location of the power socket at the back of the television might
differ depending on the model.
10
Initial Set-up
Perform the following steps before you press on the
remote control.
• Insert the batteries into the remote control.
• Connect the antenna cable to the TV.
• Plug in the AC cord to the AC outlet.
• Connect your TV to a network.
Make sure that the television is switched on and follow all
thestepsinturnspeciedhereafter.
Thersttimeyouswitchtheseton,theInitialsetupwizard
opens, which guides you through the initial setup
process.
Press OK to start your initial setup.
Step 1 Select Environment
Choose [Home] mode for the TV and assign the picture
settings for most home environments.
Choose [Shop] mode, which is not MEPS compliant, set
uptheTVwithpredenedsettingsforretailstoredisplay.
In this setting, the power consumption may be out of the
MEPS requirements. Use to select the desired location
setting ([Home], [Shop]) or [Shop with demo]). Press OK to
conrm.PressOK/ toproceedtothenextscreen.
Step 2 Network Setup
Android-based TV requires Internet service to access the
web and Smart TV applications. Connect Internet using your
existingwirelesshomenetworkorEthernetcable,andfollow
the guides on the screen. Select [Next] and press OK to
proceedtothenextscreen.
Note: You can also skip this step by selecting [I do not have
a network connection], and connect to the internet later. For
details please see "Network Connection" & "Network Setup".
Step 3 Channel Installation
This step tells how to search TV channels.
1. Press to select a Terrestial scan type and press
OK/ to start the search automatically. All available TV
programmes are stored. This operation takes a few minutes.
The display shows the progress of the search and the
number of programmes found.
Note: To prevent the channel setup process from being
interrupted, wait for the message indicating that the setup
is complete.
2. During the setup, you can press OK to stop or interrupt the
search halfway. The searched channels will be saved.
3. If you want to skip this step, choose [I don't want to scan
Terrestrial channels].
When all searching is done, the [Congratulations!]
menushowsthatyouhavesuccessfullyconguredtheinitial
setup operations.
Connections and Setup
11
Chapter 3 Home Page
Note: Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. And for some models, certain options are not available.
Press on the remote control to display Home Page. Press to select icons from the screen list. Press
OKtoentereachoption.Toexitthemenu,press .
Homepage contains 3 parts: APPS, TV and GOLIVE. Use to switch among the 3 parts.
WARNING:
•CongurethenetworksettingsbeforeusingSmartTV,Guideandapps.
•Slowresponsesand/orinterruptionsmayoccur,dependingonyournetworkconditions.
•Ifyouexperienceaproblemusinganapplication,pleasecontactthecontentprovider.
•Accordingtocircumstancesofthecontentsprovider,anapplication’supdatesortheapplicationitselfmaybe
discontinued.
•Dependingonyourcountry’sregulations,someapplicationsmayhavelimitedserviceornotbesupported.
Using Home page- APPS
To access the menu system:
1. Press to display the home page.
2. Press to move to APPS interface. Press to select the desired item, then press OK to open it or
enter the corresponding submenu.
3. You can change the item's location according to your preference, and add new items from internet.
To add apps, move the focus to one "+" block and press OK, then the APP store will be opened, where you can
choose a perferable app to install.
You can install one app only for each "+" block. Repeat the same operation to add more apps.
Note: The pre-installed apps or items can not be deleted. And the apps (regardless of order) listed in the below gure
may differ from actual product. For some models, certain apps are not available.
4. Press or repeatedly to return to the home page.
The Pre-installed
apps
APPS/ TV/ GOLIVE:
Use to focus on
each item.
APP Store
My Apps
Status:
Notication/NetworkStatus/Time
APP Store: Many useful and entertaining apps are available for downloading. After entering the APP store, you
will see the recommendations. Press to select, press OK to enter. The buttons on the top right, such as
Categories", "Search" can provide convenient operations.
My Apps: This page shows all apps installed on your TV. The "Uninstall" button on the top right is for you to uninstall
any app you don't like.
Note: The pre-installed apps or items can not be deleted.
The pre-installed apps: These are recommended Apps. Highlight an app and press OK to open it.
Note: When there is more than 1 page of Apps, you can scroll the pages in horizontal direction by pressing
when focus is on the leftmost or rightmost. You may need a webcam to use some of the above functions such
as Gesture Control. The webcam is an optional accessory, and is available by purchase separately. Only use the
specied webcam. Some external devices like webcam, smartphone, joystick and external wireless adapter may not
be supported.
12
Using Home page- TV
Note: Some options may not be available for certain signal sources. some options may appear in the next page, you
can press to switch.
ThissectionexploresthemenusofyourTV.
Press on the remote control to display Home Page. Press to enter TV page and select icons from the
screen list. Press OKtoentereachoption.Toexitthemenu,press .
TV window
Recommendation
Source
Favourite
Channels
Guide
Settings
APPS/ TV/ GOLIVE:
Use to focus on
each item.
TV window
Displays the current selected TV broadcast programme.
Recommendation
There is information of current broadcasting programmes from nine digital channels shown on the right. Pressing
OK would directly go to the corresponding channel. These nine digital channels depend on how you set favourite
channels. We recommend that you include 9 digital channels in your favourite channel list so that they can be shown
here for your convenience.
When TV is not connected to network, there is no information of current broadcasting programme on the right
but only the defaut pictures are displayed. Select a picture and press OK, then [ Full functions available upon
successful network connection.] will pop up. When you highlight [Connect] and press OK, it goes to the network
setup interface directly.
Source
Select the input source from devices connected to TV through different ports, including TV, AV, CMP, HDMI1,
HDMI2, HDMI3 and HDMI4. Press to select your desired source, and then press OKtoconrm.
Note: The available source might differ depending on the model.
Settings
You can do the settings including Picture, Sound, Network, System and Applications. For details, please refer to
introduction of Using System Settings in the Menu Operation chapter.
Favourite Channels
Add or edit your favourite channels in channels list. You can create a list of your favourite TV channels.
1. Select Fav Channels and press OK to enter.
2. Press the red button to enter Select Channel list. Press to select the favourite list and press OK to enter.
3. Press to scroll through the channel list and press the blue button to add the selected channel to your
favourite list or remove it from the favourite list.
4. Repeat this procedure to set up other favourite channels.
5. Press LIST/ toexit.
Home Page
13
Home Page
Shortcut operation: Press LIST on the remote control to directly enter channel list.
Guide
Electronic Programme Guide is an on-screen guide that displays scheduled TV programmes. You can navigate,
select, view and record programmes.
Note: When Settings > System > Guide ON is set On, it runs IP EPG when the network is connected, and runs
DTV EPG if the network is not connected. When Settings > System > Guide ON is set Off, it runs DTV EPG no
matter the network is connected or not.
General operations & instructions:
1. Select Guide icon on Home page-TV interface, and press OK to enter, or press GUIDE on the remote control
directly to enter, the On-going EPGmenuwillappear,whichallowsyoutogetinformationaboutthecurrentornext
programme playing on each channel.
2. Navigate through the different items using the navigation buttons on the remote control and operate according to
the on-screen instructions.
3. Press toexittheGuideandswitchtotheselectedchannel/programme.
Using Home page- GOLIVE
GoLive is a revolutionary international video entertainment platform that delivers a diverse selection of content from
allovertheworldtovirtuallyanyconnectedTV,phone,tablet,orbox.Ouruniquetechnologyensuresanoptimized
viewingexperiencethatisadaptedtosuit a rangeofinternetspeeds,broadcastinghigh-qualitystreamsofthe
programs and events you want on whatever device you choose, whichever country you're in.
Note: The informations are Recommended from the backstage, and will be updated periodically.
14
*Note: Below T-Link setting options and Guide Menu
options will be available only when T-Link is set to On.
Auto Power On: Use to toggle between On and
Off. When Auto Power on is set to On, TV and device
will be on at the same time.
Auto Standby: Use to toggle between On and
Off. When Auto Standby on is set to On, TV and
device will be in standby mode at the same time.
Guide Menu: Press OK/toenter.Youwillndan
on-screen guide map of the remote control about the
shortcuttooperatetheplayback,forexample,Numeric
button 2 works as PAUSE.
*Note: The CEC functions depend on the devices
connected and it is possible that some devices may
not interoperate correctly when connected to this
TV. The user manual or the manufacturer of the
problematic devices should be consulted for further
information.
Time Shift
Note: This Option is only available when Time Shift is
set to On: Select Settings> Channel> Time Shift, press
OK/ to enter and use to set Time Shift to On or
Off.
Allows you to pause, fast forward and rewind live TV,
soyoudon’thavetomissanypartofyourfavourite
programmes. Before you use the function, connect a
USBdrivetotheTVrst.Forthersttime,youshould
complete the disk setup for the USB drive.
1. Press on the remote control and select Time
Shift, then press OK toconrm.
2. Follow the directions on the screen to do the setup.
3. After the disk setup is done, press and select
Time shift.
4. Press OK to display the time shift menu and operate
according to the on-screen prompt.
5. Pressing Stopbuttonstopsthetimeshiftandexits.
- When the time shift menu disappears and only the
timing of the time shift remains on the screen, you can
press OK to call out the time shift menu.
Notes:
- Before you plug the USB drive to TV, make sure
you have backed up the data on the drive to avoid
unforeseen malfunction and data loss.
- We recommend that you use a USB drive with at
least 1GB free space and a disk speed faster than
5.0MB/sec.
- The bigger the USB drive free space for time shift,
the bigger the recording length.
Quick Access of Time Shift:
Insert a USB disk, press PLAY() on the remote
control, it will access Time Shift automatically.
PVR (Personal Video Recorder)
Allows you to record your favourite TV programmes.
Before you use the function, connect a USB drive to the
TVrst.
Using Quick Access Menu
Note: Some of the functions might be unavailable in
certain sources. And for some models, certain options
are not available.
ThissectionexploresthemenusandsettingsofyourTV.
Each menu is outlined and detailed to help you get the
most from your TV. To access the menu system:
1. In TV mode, press on the remote control to
display the quick access list.
2. Press to select the desired item, then press
OK / to open the corresponding submenu.
3. In submenus, use to select menu options, Use
OK/ to open the corresponding submenu. use
to make the adjustments.
4. Press to return to the previous menu or press
to close the menu.
The quick access list includes below items, they are
Picture Preset, Sound Preset, Picture Freeze, T-Link,
Time Shift, PVR, Schedule List and Settings.
Picture Preset
Press OK/ to display its submenus:
Use to scroll through the picture preset settings:
Standard, Dynamic, Natural, Movie and Personal.
And then press OKtoconrmtheselection.
Sound Preset
Press OK/ to display its submenus:
Use to scroll through the sound preset settings:
Standard, Music, Movie, Clear Voice and Personal.
And then press OKtoconrmtheselection.
Picture Freeze
Press OK/ to display its submenus, and use to
toggle between On and Off. When On is selected, the
display screen will be frozen.
T-Link
Use this function to search for CEC devices connected
to the HDMI sockets in your TV.
Enable or disable T-Link
1. Press and select T-Link> T-Link.
2. Press OK/ to display its submenus, and use
to select On or Off to enable or disable T-Link.
Chapter 4 Menu Operation
22
Chapter 6 Other Information
Problems & Solutions
1. Fail to link to the network.
- Check if your TV is connected with the network;
- Reboot your TV;
-Consultyourinternetserviceprovider,toconrm
if access of your router is supported. Refer to the
operation manual of your router.
- Make sure your TV is connected to a router, and
make sure your router is powered on. Check that your
router/modem has an internet connection, and that
your Ethernet cables/wireless connection is OK. Test
your connection with a computer to make sure it is OK.
Should the problem persist, contact customer service.
2. The video could not be played smoothly.
-VideosfromyourUSBashdrive---Itmayresultfrom
datatransmission,oritscodeowisfarbeyondthe
supported formats of this TV set.
- Videos downloaded from internet, or online videos.
a. It may be caused by the lower bandwidth of your
network. A high network speed is required to handle
online videos.
b. Peak internet usage times may affect the bandwidth.
c. Check if any other computers on the same network
are also operating, as they may be using up
bandwidth. Especially if they are downloading or
playing online videos.
d. The video may not be smooth itself, it is not the
problem of your TV or network.
3. When two mobile hard disks are connected with
the TV at the same time, they will not be recognized
some times.
- All mobile hard disks consume a lot of power, which
may result in power supply problems. We recommend
inserting only one hard disk, or a low power consumption
mobile hard disk.
4. The video from a mobile hard disk (USB) is
playing with no sound.
- The audio format of the video in your mobile hard disk
is not supported by the TV player.
5. Some videos fail to play.
- The formats of the videos may not be supported by the
TV, especially videos shot by certain kinds of cameras,
generally with their private protocol of formats, which are
not compatible with your TV.
6. Video stops playing midway.
- Mistakes may occur when videos are copied or
compressed, so they may automatically stop playing
during playback.
7. What should I pay attention to, when I do SW
updating
- No power cuts when SW updating;
- Avoid any operations with your remote control when
SW updating;
- .Depending on your internet connection speed, the
software updating process may take some time.
8. There are no distinct changes of TV interface after
SW updating.
- Under certain conditions, SW updating may not only
update or add new functions but also improve the
performance of the TV set, without distinct changes to
the user interface. Also, there may be no changes to the
user interface at all.
Note: Problems & solutions 1 to 2 are for the TV models which have network functions, so users of non-connected
TV models can disregard them.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TCL H9600CDS series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TCL H9600CDS series in the language / languages: English as an attachment in your email.

The manual is 10.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info