793750
14
Zoom out
Zoom in
Previous page
1/17
Next page
EN 14
English
Using more of your TV
When the TV is in networked standby mode, you can
use the App to wake up the TV remotely.
Notes:
-This feature is disabled if you press and hold the
button on the remote control and conrm to
shut the TV down.
-Before using the feature of networked waking up,
make sure the Quick start function is enabled.
-This function may not be available for certain
models.
-This feature is only available in Google TV mode.
Reset to factory default settings
Allows you to reset the TV to factory default settings.
1. Press on the remote control, select Settings
> System > About > Reset > Factory reset >
Delete everything and press OK to conrm.
2. Use the numeric buttons on the remote control to
enter the password 1234 or your own password in
case you have changed it.
3. Select OK and press OK to conrm.
4. The Welcome screen appears. Follow the
instructions in the section Initial setup.
Using the hands-free TV voice control
Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access
the Google website rst. Then follow the steps below
to access.
1. Turn the built-in MIC switch (Please refer to the
Quick Start Guide to nd the MIC switch on your
TV set) to on before using this function.
2. Press on the remote control and follow the on-
screen guide to nish pairing the remote control
with the TV.
3. Select "Yes, I'm in".
4. Say "OK Google" or "Hey Google" to activate it.
Notes:
-This hands-free TV voice control is only available
for selected models. For details, please refer to
your local dealer.
-A quiet surrounding is required for better function
when using it. The recommended distance for
using the hands-free TV voice control is within 2
meters in front of it.
-Turn the built-in MIC switch to o if you are not
going to use it.
-The availability of hands-free TV voice control
depends on your region/country/language.
-Turn on both Quick start and Screenless
service in the Settings > System > Power and
energy menu to enjoy hands-free voice control
in TV standby mode.
-Standby power consumption will increase
because the built-in MIC is always listening
when the Google Assistant or voice control with
the built-in MIC is enabled.
-This feature is only available in Google TV
mode.
Variable Refresh Rate
Variable Refresh Rate is a feature that will allow
smooth gaming and eliminate screen tearing. The
refresh rate can dynamically change to up to 120Hz.
Under source of HDMI1, HDMI2, HDMI3 or
HDMI4(the number of HDMI socket on the TV will
vary according to TV model), press on the remote
control and select Settings > Channels and inputs
> Inputs > Variable Refresh Rate, and press OK to
toggle between on or o󰀨.
Notes:
-4K@120Hz is only available on HDMI 1 or HDMI
2.
-some models support refresh rate up to 120Hz.
-You need to make sure your Games Console or
PC support Variable Refresh Rate, and you may
need to check your games console settings to
activate the function.
-The game/content also will need to support
Variable Refresh Rate, and you may also need
to check the settings within the game.
Multi Visual
Allows you to enjoy di󰀨erent programmes with your
family on one TV at the same time.
The multi visual function is enabled by default. To use
the function, make sure your phone is Android OS
and the WiFi on the phone is turned on. Then follow
the steps below to operate.
1. Press on the remote control, select Settings >
Network and Internet > Wi-Fi, and press OK to
turn it on.
2. Press on the remote control,then select Multi
Visual > Select your desired display mode and
press OK to enter. Press "Start now" to connect.
3. Activate the cast screen function on your phone
and choose the TV’s name you want to connect in
the searching list.
4. For the rst time, depending on di󰀨erent types of
phones, there are two situations:
- An invitation prompt appears, select Accept and
press OK to connect.
- Enter a correct PIN code to connect as per the
PIN message on the phone.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TCL 75C735 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TCL 75C735 in the language / languages: English as an attachment in your email.

The manual is 2.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TCL 75C735

TCL 75C735 User Manual - German - 18 pages

TCL 75C735 User Manual - German - 18 pages

TCL 75C735 User Manual - Dutch - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info