794250
15
Zoom out
Zoom in
Previous page
1/45
Next page
14
code on the TV screen and download T-Cast.
Note: Make sure the smart device and your TV are
in the same home LAN (local area network) or
network segment to use TV remote function.
Reset Shop
Allows you to reset the TV to factory default settings.
1. Press on the remote control to display the
homepage, Press ▲/◄/► to select (Settings) >
Device Preferences > Reset and press OK to
enter.
2. Press / to select Factory data reset and press
OK to enter. Then select Erase everything and
press OK to confirm.
3. Enter 1234 or the PIN according to the on-screen
prompt.
4. Select OK and press OK to conrm.
5. The Initial setup wizard appears. Follow the
instructions in the section Initial setup.
Netix Settings
Netix provides on-demand movies and TV shows
delivered via the Internet. Netix is available in certain
countries.Unlimited membership is required. More
information can be found at www.netix.com <http://
www.netix.com/> .
Note: you can directly access Netix via clicking the
Netix button on the remote control.
Password in Parental Control
The default password is 1234. You can change it to a
new one.
The super password is 0423. If you forget your code,
enter the super password to override any existing
codes.
Using the Hands-free TV Voice
Control
(* not available for some models)
Before using the hands-free TV voice control, connect
the TV to the network and make sure it can access the
Google website rst. Then follow the steps below to
access.
1. Turn the built-in MIC switch (next to the power button)
to on before using this function.
2. Access the Android TV homepage by pressing on
the remote control.
3. Select (Settings) > Device Preferences > Google
Assistant > "Ok Google" detection and press OK
the TV rst.
Note: The feature is available only in selected products
and, due to specific TV network limitations and country
technical requirements, might not be available in
product or place of installation. Feature might also be
blocked by TV network due to copyright protection (HD
content, recording protection). Please use on the
remote control to check if the feature is available in your
product.
1. Press on the remote control and select PVR.
2. Press OK/► to enter and select Record. It starts to
record automatically.
3. Press blue button to access Settings and use
▲/▼/◄/► to adjust the recording duration.
4. Press OK or to stop recording manually, the
recorded file will be saved. In normal operation, the
recording will stop automatically when the recording
duration expires.
Note: you can nd and color buttons on the virtual
remote control keyboard for RC802V.
5. In recording, the PVR mini pane will also show on
the screen to indicate the recording progress.
6. To watch the recorded programme, exit PVR mode
first.Press and select PVR > PVR list, then select
the related record file. Press OK to play. (It is the
same if you record a digital radio programme.)
Notes:
- This feature is available only for digital non encrypted
channels.
- Before you connect the USB drive to the TV, make
sure you have backed up the data in the drive to avoid
the loss of your important data due to unforeseen
malfunction.
- The bigger the USB drive free memory for the PVR
function, the bigger the recording length.
- If you want to change channel or signal source during
recording, store the recording data before changing the
channel or source.
- The TV cannot play files normally if the parameters
of the file exceed the limitations of the system, the file
format is not supported, the file is damaged, or the file
cannot be decoded.
- Do not disconnect the USB drive when the system is
reading a file or transmitting data, otherwise the system
or the drive may be damaged.
T-Cast
T-Cast lets you enjoy plenty of videos, rich of
applications, and share great contents on large
screen. It also allows you to turn a smart device
into a sophisticated remote control, providing more
features than your normal TV remote control. You
can then control your TV through your smart device.
Follow the on-screen instructions to scan the QR
Using More of Your TV
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TCL 55P717 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TCL 55P717 in the language / languages: English as an attachment in your email.

The manual is 15.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info