794253
17
Zoom out
Zoom in
Previous page
1/24
Next page
16
System Settings Menu
SPDIF Mode
Press OK to toggle between Auto and PCM.
Audio Language
Choose from the list of languages available for the pro-
gram you’re watching. The language chosen becomes
your preferred language for all digital channels until
you turn the TV off. If the language chosen is not being
broadcasted with a program, the TV plays the default
language for the program.
Note: The [Default Audio Language] option is only avail-
ablefor digital channels.
SPDIF Delay
This option is used to synchronize the sound with the
picture. If the sound is slower/quicker than the action
of the picture, you can press ◄/► to turn down/up the
numerical value.
TIME
Press setting button and select TIME. The options are
as follows:
Note: Time Zone is available only when Auto
Synchronization (submenu of Clock) is set to ON.
Press OK to enter, and then press / to select Off,
Low, High, or xvYCC.
Note:
For some models, the options are Off, On, xvYCC.
Motion Enhance
Motion Enhance: Press OK to enter. Press / select
Off, Low, Middle, or High.
Gamma
Sets the shape of the Gamma curve. Use lower Gamma
values for bright ambient lighting, and higher values
when it is dark.
Color Temperature
Adjusts the color temperature of the picture. Press OK
to enter. Press / to select the color settings: Cold
for a more blue palette of picture colors; medium and
Warm for a more red palette of picture colors.
Note: For some models, the Color Temperature option
is not available.
Aspect Ratio
Press OK to enter. Press / select the mode to
display the picture: Auto, 4:3, 16:9, Just Scan.
Noise Reduction
Improves the quality of the picture in the case of poor
reception. Press OK to enter. Press / to select Off,
Low, Middle, High or Auto.
Dynamic Contrast
Press OK to select On or Off.
SOUND
Press setting button and select Sound, then press OK
to confirm. The Sound options are as follows:
Sound Mode
Press OK to toggle among Normal, Music, Movie,
News and User.
Balance
Press OK to balance the sound between the left and
right speakers from 0 to 100.
Auto Volume
To keep the same sound level for all channels, set Auto
Volume to On .
SOUND
Sound Mode
Balance
Auto Volume
SPDIF Mode
Audio Language
SPDIF Delay
Surround Sound
Audio Type
AD Switch
Normal
TIME
Auto Sync
Clock
Region
Sleep Timer
Time Zone
Off Time
On
Surround Sound
Press OK to enter, and then press ▲/▼ to select
the simulated surround sound feature to be Off or
Surround.
Audio Type
Press OK to select the sound type mode to be Visual
Impaired or Normal.
Note: This option is only available for digital channels.
AD Switch
Press OK to enter, and then press ◄/► to select the
audio description (AD) to be On or Off. When set to
On, you can press ▲/▼ to select AD Volume, and then
press ◄/► to adjust the volume for audio description.
Note: This option is only available when Audio Type is
set to Visual Impaired.
Auto Sync
Press OK to toggle between On and Off.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TCL 43P20US at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TCL 43P20US in the language / languages: English as an attachment in your email.

The manual is 2.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info