14
Phantom Power
Before using any setup configuration, determine the type
of microphone you are using:
Dynamic microphone: phantom power off.
Condenser microphone: phantom power on.
Enabling Phantom Power:
1. Confirm that your sound system master level
(overall volume) is off.
2. To prevent nasty pop sounds, turn off the phantom
power for the channel Double’s output will be
connected to or the entire mixer.
3. Connect Double's power adapter to main power
and to the Power Input on Double.
4. Press and hold the Bank Up and Bank Down
buttons simultaneously until the Phantom Power Light
comes on.To turn phantom power off, repeat this step.
Setup Configurations
Set your sound system level to off when you are
turning phantom power on/off as it can create a
“pop” sound in your speakers.
NOTE: