10
Section 2: Getting Started
Back Panel Description
1. Voice Input
This is the main analog input for voice or monophonic
instruments. All processing blocks in VoicePro can be used
on audio signals received at this input.
2. Auxilliary Input
This input allows analog audio sources of any kind to be
routed to the µMod, Delay, Reverb and Transducer effects.
3. Left and Right Outputs
A full analog stereo mix is always provided on these
outputs.
4. AES-EBU Digital I/O
Digital input and multi-channel output is provided using a
DB-25 connector. Using the supplied break-out cable or
standard DB-25 cable, VoicePro can receive separate
digital voice and auxilliary input signals. The 8 digital
outputs are configurable in the Utlity | I/O Tab. Digital
outputs 1 and 2 are fixed to the full stereo mix.
5. Wordclock
Use a standard BNC cable to synchronize VoicePro to
external wordclock.
6. Ethernet
Ethernet can be used to facilitate software upgrades and
other improvements as they become available.
7. MIDI IN / OUT
By connecting VoicePro to a MIDI-equipped computer,
editing, automation, and other control is possible. A MIDI
keyboard controller can also be connected here to allow
setting of harmony and pitch shifting intervals.
8. RS-232
Currently not supported
9. Power
VoicePro has a auto-sensing power supply allowing use
with worldwide power voltages and frequencies.
1 2 3
4 5
6 7 8
9
