658317
13
Zoom out
Zoom in
Previous page
1/59
Next page
11
QUICKSTART
Press the USER Button. You will now hear
the “Telephone Voice” effect. This preset
has the USER button setup to do this
function. (make sure you try singing into the
mic to hear what’s going on)
Press the HARMONY MUTE button (8) to
turn off the harmonies.
Press the USER button and then the
HARMONY MUTE button to enable the
harmonies and disable the Telephone Voice
effect.
Hold the HOLD FOR BYPASS BUTTON (8)
to bypass all effects on VoiceLive.
Hold the HOLD FOR BYPASS BUTTON (8)
again to enable effects in VoiceLive.
Press the KEY button (2) followed by the
PREVIOUS/NEXT buttons to change the
key of the harmony scale.
Press the SCALE button (3) followed by the
PREVIOUS/NEXT buttons to change the
scale type.
Press the PRESET SELECT (1) button
followed by the PREVIOUS/NEXT buttons to
change the preset number.
Preset Direct Mode
Preset Direct Mode makes the top buttons on
VoiceLive respond like radio station buttons on
a car radio for preset access.
Hold the DIRECT button (3) when in preset
mode until the LED Text Display flashes
DRCT, putting VoiceLive into Preset Direct
Mode.
Press any of the top 4 buttons to access the
programmed direct presets.
Press the PREVIOUS/NEXT buttons to find
a different preset that you like, making sure
that the second character on the LED text
display is a “*”.
Press and hold one of the top 4 buttons,
until the second character on the LED text
display changes to A, B, C or D. You have
now programmed that button to recall the
desired preset.
Note: Holding a direct button when a preset
has not been changed ("*" is not displayed) will
cause VoiceLive to leave direct mode.
Here's how the LED text Display works in
Preset Direct Mode:
For example:
PA23
P: This character indicates that the unit is in
Preset Mode.
A: A,B,C,D means that a Direct preset is
recalled. Holding one of the top 4 buttons
when this is displayed will put VoiceLive
into a new mode. If this character is a “*
then a Direct preset is not recalled.
Holding one of the 4 top buttons will pro-
gram this button to recall the current pre-
set.
23: This indicates the current preset number.
Find a preset that you like with lots of
harmony using the PREVIOUS/NEXT
buttons.
Hold one of the top four buttons to program
a DIRECT button to this preset.
Preset Voice Mode
Hold the VOICE button (4) until the LED text
display flashes VOIC to put VoiceLive into
Preset Voice Mode.
Press any of the top four buttons to
enable/disable a harmony voice. Notice that
the Vocal 1 - 4 LEDs to the right of the LCD
display indicate which Voices are enabled.
Press the PREVIOUS/NEXT buttons to
change presets. Notice that the
enabled/disabled combination of voices do
not change as you change presets.
Here's how the LED text Display works in
Preset Voice Mode:
For example:
PV23
P: This character indicates that the unit is in
Preset Mode.
V: This indicates that VoiceLive is in Voice
Mode.
23: This indicates the current preset number.
Note: Key and Scale may only be changed
with scale type presets. Pressing the KEY (2)
and SCALE buttons when on anything other
than a Scale preset will have no effect.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TC Helicon Voicelive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TC Helicon Voicelive in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TC Helicon Voicelive

TC Helicon Voicelive User Manual - German - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info