658317
8
Zoom out
Zoom in
Previous page
1/59
Next page
6
FRONT PANEL
LED TEXT DISPLAY
Displays important, top-level
performance and editing
information.
GLOBAL FX DOT
Indicates that a global effect
preset has been selected. This
means that delay and reverb
settings will remain unchanged
when changing presets.
EDITED DOT
Indicates that preset settings
have been edited. Powering
down or changing to another
preset without first storing will
result in a loss of changes.
MIC IN DOT
Indicates that the microphone
input is selected.
LIMIT DOT
Indicates that the limiter is
active.
INPUT METER
Peak meter shows Mic or Line
Input level. The meter range is:
-40 to 0dB.
INPUT CLIP LED
Indicates that the Mic/Line or
instrument input level is too
high, possibly causing digital
distortion. Reduce the input
level to correct this condition.
The Input Clip LED may flash
when the limiter is enabled,
which indicates clipping of initial
transients and does not
severely degrade audio
performance.
OUTPUT CLIP LED
Indicates an internal DSP
overflow. Reduce the overall
level of the harmony voices and
vocal effects to correct this
condition.
MIDI IN LED
Indicates valid, incoming MIDI
information.
LCD TEXT DISPLAY
Displays top-level preset
information (preset mode),
detailed preset information
(preset edit screens), system
configuration (I/O and utility
edit screens), Song data (Song
mode), and any important status
messages or user alerts.
Voices LEDs (1-4)
Indicates On/Off status of
individual harmony voices. All 4
green LEDs flash to indicate
Harmony Mute as a result of the
HARMONY MUTE/HOLD FOR
BYPASS button pressed.
Red Voice Effect LEDs
These indicate the effects that
are enabled for a preset. All 4
red LEDs flash to indicate that
VoiceLive is in Bypass mode as
a result of holding the
HARMONY MUTE/HOLD FOR
BYPASS button.
HARMONY LED
Indicates On/Off status of overall
harmony.
THICKEN LED
Indicates On/Off status of
lead voice thickening.
EFFECTS LED
Indicates On/Off status of
Reverb and Delay.
PITCH CORRECT LED
Indicates On/Off status of
pitch correction.
I/O LED
Indicates that you are on an
IO parameter edit screen.
UTILITIES LED
Indicates that you are on a
Utility parameter edit screen.
LEVEL/EDIT KNOBS
In performance modes,
these are used to adjust
audio levels of Lead Voice,
Harmony Voices,
Instrument input and overall
Output level. You store the
IO/UTIL settings to save
these level settings. Press
STORE to initiate this
procedure. In the edit
modes, these knobs are
used to adjust parameter
values. Please note that at
the end of the travel of these
knobs, the parameter values
will scroll. Turn back the
knob to stop scrolling and
adjust to find your desired
value.
LEAD HARMONY INSTRUMENT OUTPUT
EDIT 1 EDIT 2 EDIT 3 EDIT 4
Input Clip
0 PPM dB
-5
-10
Out Clip
-20
-40
HARMONY
THICKEN
EFFECTS
PITCH CORR.
I/O
UTILITIES
MIDI IN
PROGRAM DISPLAY
HARMONY | CORRECTION | EFFECTS
VOICELIVE
VOICE 2
VOICE 4
VOICE 1
VOICE 3
LIMITMIC INGLOBAL FX EDITED
PRESET# HARMONY MODE ROOT SCALE/CHORD
Flying Eagle
Pr37
37: Scale F#maj1
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TC Helicon Voicelive at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TC Helicon Voicelive in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TC Helicon Voicelive

TC Helicon Voicelive User Manual - German - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info