Manual TC Helicon VoiceLive Rack (page 28 of 89) (English)

658357

Zoom out

Zoom in

1/89

Detailed Operation

b) Set the GLOBAL NATURALPLAY parameter

in the SYSTEM tab of the Setup menu to

SCALE. This will disable the auto input sensing

feature of NaturalPlay.

To set key using the Switch3 footswitch:

You can connect the optional Switch3 footswitch

for direct access to Key setting during perfor-

mance.

1. Connect the Switch3 to the PEDAL input.

2. Set any of the footswitches to SET KEY in the

SWITCH3 tab of the Setup menu.

3. Load a harmony preset to sing through.

4. Tap the footswitch you assigned to Set Key in

step 2.

5. Note the prompt in VoiceLive Rack’s display

and use the footswitches to input your key.

The previous assignment of the 3 footswitches

will temporarily be replaced by the key setting

functions.

6. The key will become active immediately unless

you press the Cancel footswitch.

If you have a guitar connected, this makes key set-

ting with Switch3 even easier. Simply play a major

or minor chord that you want to use as the key

then tap the Set Key button on the footswitch.

The chord you play will be recognized automati-

cally.

Note that the Key you set is global so you can

try other presets with your song without enter-

ing Key again. To congure presets so they can

save different keys and scales, set the GLOBAL

KEY/SCALE parameter in the SYSTEM tab of the

Setup menu to OFF.

If you’re lucky the rst time, you’ll be rewarded

with musically appropriate Harmony and/or

Hardtune effects musically following your whole

chorus or song. If not, you can try the following:

tune-type processing products.

Briey, all of the chords in an entire song and your

melody can belong to a single major or minor

“Key”. When the match of Key and song is cor-

rect, xed key is harmony is nearly indistinguish-

able from recorded harmony. There are limita-

tions however:

• Fixed Key harmony works for many, but not all

songs.

• Fixed Key works best with 3rd harmony inter-

vals; adding the 5th (interval: Higher) reduces

the number of compatible songs.

• The terms “Key” and “Key and scale” can be

used interchangeably.

You should be singing with musical backing and

stay true to a A=440Hz reference. This could be

a CD or other musicians. Choose a simple song

to start with. Determine the Key of your song;

this is often the rst or last chord in a song with-

out extensions. For example G Major is a valid

Key, Gm7b5 is not.

To set key from the front panel:

Both harmony and Hardtune use the same key

and this is set in the HARMONY edit tab.

1. Load a preset with Harmony active. A good

one to start with is #3 CLOSE UP 3RD.

2. Hold the Harmony button.

3. Set the KEY and SCALE parameters on the

top line* to the key of your song.

* If these parameters are not visible, the Natu-

ralPlay algorithm in VoiceLive Rack has recognized

input from either the AUX IN, GUITAR IN or

MIDI inputs and has congured itself to derive

guidance from that input.

In this case you can:

a) Cycle the power off and on and ensure no

connections are made to the inputs noted

above.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TC Helicon VoiceLive Rack in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TC Helicon VoiceLive Rack

TC Helicon VoiceLive Rack User Manual - German - 18 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TC Helicon VoiceLive Rack Manual

Product: