Manual TC Helicon VoiceLive 3 Extreme (page 17 of 202) (English)

658241

Zoom out

Zoom in

1/202

Introduction

VL3X – Reference manual (updated 2015-10-20) 14

Global Effects

VL3X allows you to define a specific Preset as

the “Global” Preset. This defines all of the effects

and parameters within that Preset and allows

them to be easily applied to other Presets.

What does that mean for you? Easier, quick-

er Preset creation and access to consistent

sounds!

Here is an example:

“I want to use this great reverb on a whole bunch

of Presets. How do I do that?”

► First, edit the guitar reverb on your Global Pre-

set (by default, this is Preset no. 491). Editing

guitar settings is explained in greater detail in

“Editing the Guitar Layer”.

► Then go to each Preset where you would like

to use the same Reverb, go to the Reverb

settings and change the Global parameter to

“On”.

Done! This Preset will now use the Reverb set-

tings from the Global Preset.

Setting Global to on links an effect to the

settings defined in the Global Preset

Global effects are available for each and every

effect in the Vocal and Guitar Layers. There are

endless possibilities for Global effects handling,

but here are a couple we think you might like:

Use the same guitar effects

across all Presets

This essentially turns VL3X’s Guitar Layer into a

series of stomp-boxes that you only need to set

up once.

“How do I do that?”

► Simply edit ANY Preset until all of the guitar

effects and footswitch assignments are how

you like them.

► Enter the Setup menu and navigate to the Sys-

tem tab using the horizontal Arrow buttons.

► Dial the Control knob until the line saying “All

Guitar FX Global: Off” is highlighted.

► Turn Mix knob 3 or Mix knob 4 under the dis-

play until “Off” changes to “On”.

Done! Every Preset will now have the same

guitar sounds.

Set All Guitar FX Global to “On” to use the

same guitar effect in all Presets

Make sure a particular effect

always sounds the same

Want a certain Delay available in every Preset?

No problem.

► Just edit the Global Preset’s Delay setting.

► Go to each Preset where you would like to use

the same Delay, go to the Delay settings and

change the Global parameter to “On”.

Always use the same guitar amp model,

but have everything else change

► Easy! Adjust the Global Preset’s Amp setting

the way you want it.

► Go to each Preset where you would like to use

the same Amp, go to the Amp settings and

change the Global parameter to “On”.

Updating Global settings

The Global system is “opt in”. This means each

Preset carries its own individual settings until

you change an effect to Global. Once that hap-

pens, the current Preset and Global Preset set-

tings become shared.

Once you have changed an effect to Glob-

al ON, any edits you make within that Pre-

set affect the Global settings as well. This

means you don’t have to bounce back and forth

between the Global and current Preset to make

changes to Global effects.

It also means that you need to be aware of the

above, so you don’t accidentally edit a Global

setting, thinking you are only editing the current

Preset. With great power comes great respon-

sibility!

Have the TC helicon voice 3 extreme the function fadeout in the looper ? Submitted on 9-5-2022 at 22:33
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of TC Helicon VoiceLive 3 Extreme in the language / languages: English as an attachment in your email.

The manual is 16,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TC Helicon VoiceLive 3 Extreme

TC Helicon VoiceLive 3 Extreme Quick start guide - English, German - 118 pages

TC Helicon VoiceLive 3 Extreme User Manual - German - 218 pages

TC Helicon VoiceLive 3 Extreme Quick start guide - French, Italian, Spanish - 118 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

TC Helicon VoiceLive 3 Extreme Manual

Product: