8
REAR PANEL
4. Digital I/O
S/PDIF In/Out - Sends and receives digital
audio to S/PDIF or AES\EBU standards. Using
digital I/O (inputs and outputs) instead of the
analog I/O bypasses VoiceDoubler’s converter
circuitry for audio improvement when used with
compatible systems.
5. MIDI I/O
This is the standard MIDI in, out and thru
interface used for editing, preset control and
data storage and recall.
6. Pedal In
This input accepts single or triple function
footswitches. Any normally-open passive
footswitch will work for the single function. A
triple function footswitch is available from TC-
Helicon called Switch 3. The switch type is
detected automatically on power up.
1 Button: Bypass only
3 Button: Preset Down, Preset Up, Bypass
1 2 3 4 5 6
1. Voice Input
This is the main analog input to VoiceDoubler.
It accepts a balanced line level XLR cable
carrying a monophonic vocal source.
2. Auxilliary Input
This input can be used to send any
instruments or audio sources through
VoiceDoubler’s µMod (micromod) processing
block. The level control for this input is in the
Edit menu.
3. Main Outputs
This is the balanced analog, line level stereo
output of VoiceDoubler. Mono operation is
possible by switching the Output system
parameter in the Edit menu.
