658299
36
Zoom out
Zoom in
Previous page
1/77
Next page
Setup button/section
Play Electric – Reference manual (2014-07-16) 34
System page 2 (5/8)
Global Key parameter
Use the Global Key parameter to define if key
and scale information for harmony generation
and/or pitch correction should be global or pre-
set-specific.
Off setting
Key can be set per individual preset, via direct
key setting (C, D, F# etc ), Guitar IN via Natural-
Play, RoomSense or Aux.
On setting
When a key is chosen within a preset, that key
will remain even when you switch to another pre-
set.
Global Tempo parameter
Use the Global Tempo parameter to define if
tempo-based effects should follow a global tem-
po or a preset-specific setting.
Off setting
Tap tempo set within a preset changes from pre-
set to preset.
On setting
Wen you have set a tempo using tempo tap-
ping within a preset, that tempo will remain even
when you switch to another preset.
RoomSense LoCut parameter
Use the RoomSense LoCut parameter to “roll
off” undesirable frequencies from your mix.
In some circumstances, the low frequencies “in
the room” – such as bass or kick drum – can
cause the RoomSense microphones to become
muddy sounding. The built-in high-pass filter al-
lows you to reduce this kind of “rumble”.
Mic Boost parameter
If you are a quiet singer, you can use the Mic
Boost parameter to increase the microphone
gain.
Some artists sing more quietly than others, re-
quiring the Mic Gain knob to be turned up quite
far. To offset this, we have added a Mic Boost
feature which allows +6 (“Low”) or +12 (“High”)
dB of extra gain if you need it. The default value
is +6 dB (“Low”).
Loop page (6/8)
Input parameter
Use the Input parameter to set the input source(s)
for loop recording. The following settings are
available:
Guitar
Lead
Aux
Lead + Guitar
Lead + Aux
Guitar + Aux
All: With the All setting, everything you hear
will also be recorded as part of the loop.
Undo parameter
Use the Undo parameter to switch the Loop
undo function on or off.
On setting
Undo is active and may be used to undo the last
change made to your loop. It is common to use
undo when you have added a loop section that
you are not happy with and want to try it again.
You can also press Undo a second time to redo
your last Undo action. This will bring a loop over-
dub back that you have removed using Undo.
In this mode, the total available loop time is 15
seconds.
Off setting
Disables undo, freeing some memory for addi-
tional looping.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TC Helicon Play Electric at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TC Helicon Play Electric in the language / languages: English as an attachment in your email.

The manual is 5,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TC Helicon Play Electric

TC Helicon Play Electric User Manual - German - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info