658299
33
Zoom out
Zoom in
Previous page
1/77
Next page
Setup button/section
Play Electric – Reference manual (2014-07-16) 31
Output page (2/8)
Output parameter
Use the Output parameter to set how signals are
sent over the XLR outputs of Play Electric.
Stereo setting
If nothing is connected to GUITAR OUT, both vo-
cal and guitar signals are sent in stereo via these
outputs. If GUITAR OUT is connected, only ste-
reo vocals will be sent.
Mono setting
With the Mono setting, Mono Vocal signals are
sent via the LEFT XLR output.
If GUITAR OUT is connected, Dry vocal signals
(with tone and global pitch correction) are sent
via the LEFT XLR output and vocal effects only
(no dry) are sent via the RIGHT XLR output.
This mode is great if you want to control the
wet/dry balance of your vocal signal at a mixing
board.
If GUITAR OUT is NOT connected, your effected
guitar sounds are added to the LEFT channel,
joining your effected vocal.
Dual Mono setting
If GUITAR OUT is connected, your effected vo-
cal sounds are sent via the LEFT XLR output
and your effected guitar sounds are sent via the
GUITAR OUT. Guitar sounds in the RIGHT XLR
output are muted.
If GUITAR OUT is NOT connected, your effected
vocal sounds are sent via the LEFT XLR output
and your effected guitar sounds are sent via the
RIGHT XLR output.
Vocal Cancel function
The Vocal Cancel function attempts to remove
the vocals from a piece of music.
Off setting
With the Off setting, no processing is performed
on the Aux input signal.
On setting
With the On setting, Play Electric will attempt to
remove lead vocals from a piece of music.
This process can create “Karaoke”-style music
for you to sing along to, including key information
for harmony generation.
The processing capability can vary quite a bit
from song to song, depending on the way the
song was originally mixed.
Lead Mute parameter
Use the Lead Mute parameter to mute the lead
vocal and only output the processed signals.
Off setting
Lead Vocals are routed to the main mix.
On setting
Lead vocals are removed from the main mix.
Out Level parameter
Use the Out Level parameter to toggle between
Mic and Line level output modes. Typically, you
will want to use the Mic level setting – but if you
are not getting enough signal at your mixer or
other destination and you are sure the Mic Input
and Mix Out levels are OK, try the Line setting.
USB Out Level parameter
Use the USB Out Level parameter to adjust the
overall level of the USB output from Play Electric.
Use this parameter to attenuate the signal if your
DAW is receiving a signal that is too loud.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TC Helicon Play Electric at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TC Helicon Play Electric in the language / languages: English as an attachment in your email.

The manual is 5,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TC Helicon Play Electric

TC Helicon Play Electric User Manual - German - 84 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info