BP Smart Battery Charger User Manual V1.1
3. INSTALLING GUIDE
3.1 Material List
The Unit is packed with the following materials:
1) User's Manual
2) Temperature Sensor
Please confirm the series number on the color box and the back of the product is the same.
3.2 Preparing for Installation
3.2.1 Location
Please install BP Series battery charger in a location that meets the requirements as
following:
Dry: The unit is intended for use in a dry location. Do not allow water or other fluids to drip
or splash on it. Do not mount the charger in an area subject to rain, spray or splashing
bilge water.
Clean: Do not expose the unit to metal filings or any other form of conductive
contamination. The presence of conductive contamination can cause damage and void
your warranty.
Cool: For best performance, the ambient air temperature should be between 32F (0 ℃)
and 95F (30 ℃), the cooler the better. At higher ambient temperature, BP Series battery
charger can work, but the output current will be automatically reduced to protect the
charger from high internal temperatures.
Ventilated: Allow at least 4 inches (10cm) of clearance around all sides of the battery
charger for air flow. Ensure the ventilation openings on the unit are not obstructed. If
mounting in a compartment, ventilate the compartment with louvers or cut-outs to prevent
overheating.
Safe: Not to install in areas containing gasoline tanks or fittings.
Close to AC junction box: Avoid the use of extended wire lengths if possible.
TBB Power Co. Ltd. 8