Manual Taurus TANGER 900 (page 13 of 96) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

730878

Zoom out

Zoom in

1/96

- Fit the appliance into the wall support.

FITTING THE BASE FEET

- The appliance has some base feet(Fig4) on

which the product can be supported.

- To assemble the base feet, place the appliance

face down.

- Fit the base feet on the main body of the

appliance.

- Attach the base feet to the body of the ap-

pliance using the screws (Supplied with the

appliance).

- Stand the appliance up again so as to check

that the base feet work properly.

INSTRUCTIONS FOR USE

BEFORE USE:

- Remove the appliance’s protective lm.

- Make sure that all the product’s packaging has

been removed.

- Some parts of the appliance have been lightly

greased, consequently, the appliance may give

off a light smoke the rst time it is used. After a

short time, this smoke will disappear.

- To eliminate the smell given off by the appli-

ance when used for the rst time, it is recom-

mended to have it on at full power for 2 hours in

a well-ventilated room.

- Prepare the appliance according to the function

you wish to use.

USE:

- Unroll the cable completely before plugging it

in.

- Connect the appliance to the mains.

- Turn the appliance on using the on/off switch

(D1)

WHEN YOU HAVE FINISHED USING THE

APPLIANCE:

- Turn the appliance off, using the on/off switch

(D1).

- Unplug the appliance to the mains.

SAFETY THERMAL PROTECTOR:

- The appliance has a safety device, which pro-

tects the appliance from overheating.

- When the appliance switches itself on and

off repeatedly, for reasons other than the

thermostat control, check to ensure that there

are no obstacles that impede correct air entry

or expulsion.

- If the appliance turns itself off and does not

switch itself on again, disconnect it from the

mains supply, and wait for approximately 15

minutes before reconnecting. If the machine

does not start again seek authorised technical

assistance.

CLEANING

- Disconnect the appliance from the mains and

let it cool before undertaking any cleaning task.

- Clean the equipment with a damp cloth with a

few drops of washing-up liquid and then dry.

- Do not use solvents, or products with an acid or

base pH such as bleach, or abrasive products,

to clean the appliance.

- Do not let water or any other liquid get into the

air vents to avoid damage to the inner parts of

the appliance.

- Do not submerge the appliance in water or any

other liquid, or place it under a running tap.

- If the appliance is not in good condition of

cleanliness, its surface may degrade and

inexorably affect the duration of the appliance’s

useful life and could become unsafe to use.

- Note: When the appliance is switched on

during the heating function, after a long period

stopped or operating only in fan mode, it is

possible that at rst it releases some smoke,

without any consequence, because dust and

other particles accumulated in the heating

element are burning. This phenomenon can be

avoided by cleaning up previously and through

the vents of the appliance and its interior with

the help of a vacuum cleaner or with a jet of

compressed air.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Taurus TANGER 900 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Taurus TANGER 900 Manual

Product: