691231
17
Zoom out
Zoom in
Previous page
1/64
Next page
T9.9
17
Step 2: Assembly of the upright
side frame
Guide the control cable that comes
out of the base frame through
the left side frame (C) from the
bottom to the top. In order to
make this step easier for you, a
wire was already led through the
side frame (C), which is mounted
on the upper and lower end of the
side frame. Loosen the wire on the
lower end and attach the control
cable to it. Now pull it upwards with the help of the wire. In order to prevent the
control cable from sliding down, mount it in the upper area of the side frame (C) with
the wire. Now plug the left side frame (C) into the left adapter of the base frame (B)
and mount this then with the screws (c). Then proceed exactly the same for the right
upright side frame (D). Once you have tightened all screws (a), press the cover caps (f)
onto the heads of the screws.
Step 3: Assembly of the cockpit
Connect the console cable (A) rst
with the cable from the left console
mast (E) and mount the console on
the left and right console mast (E
and F) with four screws (c). Then
tighten the screws (a) in order to
mount the console masts on the
frame. Finally, mount the left and
right cover (G and H) on the frame
(B) with six screws (b).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Taurus T9.9 - Treadmill at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Taurus T9.9 - Treadmill in the language / languages: English as an attachment in your email.

The manual is 7,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info