727647
17
Zoom out
Zoom in
Previous page
1/22
Next page
INSTRUCTIONS AND RECOMMENDATIONS FOR USE. READ CAREFULLY
SUBJECT EXPLANATION WHAT TO DO / WHAT NOT TO DO
Filling the frozen food
vessel
The frozen food expands on being
processed under pressure.
If a vessel is over-filled with frozen
food, the food may get into the
appliance and damage its bearings.
Over-filling the vessel may deform it.
What to do:
-Only fill the vessel with frozen food up to the maximum
level marked.
-Before freezing the food, check that the vessel lid can be
easily fitted without pressing on the food.
What not to do:
-Respect the maximum level marked. If an over-filled vessel
is processed by mistake:
-After processing, clean the appliance using the cleaning
function to remove all leftover food.
Over-liquidising of
certain ingredients
Certain ingredients with a high
content of proteins, fats, natural
emulsifiers, lecithin, egg and by-
products tend to liquidise profusely.
Filing the container to the maximum
level can lead to over-liquidising,
causing contamination problems
inside the system and subsequent
dirtiness
What to do:
-We recommend adapting the quantities of the recipe and
reducing the usual portions to levels with right level of
liquidising and without over-liquidising.
-Before freezing the food, check that the vessel lid can be
easily fitted without pressing on the food.
- If the ingredient is already frozen: we recommend
processing one or several portions and reducing the level by
removing the ice by hand until a suitable level is reached.
Before freezing the
food
A surface that is not flat or uneven
distribution of the frozen food may
damage the blade.
What to do:
-Flatten the surface to be frozen and ensure the lid can be
fitted easily without pressing on the food.
-Keep the outside of the vessels dry to prevent frost forming
around the vessel.
-When closing the frozen food vessel check that there is no
leftover food or water between the lid and the vessel which
would make it difficult to remove it after freezing.
What not to do:
-Re-freeze previously-processed frozen food without
flattening it.
Freezing more than
24 hrs.
The content to be processed must be
solid throughout.
-Frozen food which is soft in the
centre causes the motor to function
incorrectly and affects the texture
quality
What to do:
-Freezing the food for at least 24 hours in a standard 4-star
freezer.
-Freeze the food at between -20ºC and -22ºC to obtain
correct texture quality.
What not to do:
-Process frozen food that has not been completely frozen.
-Process frozen food which is not at -20ºC. The quality
obtained may be too soft.
Positioning the blade
and jar lid
If the blade is incorrectly positioned
this may cause it to fall during the
process. If this occurs you will hear a
loud noise.
Not fitting the lid may contaminate the
system with food
Que hacer:
- Colocar correctamente la cuchilla y la tapa jarra.
- Comprobar que la cuchilla esté bien sujeta.
- Atender al aparato durante los primeros instantes una vez
puesto en marcha, para detectar algún ruido fuerte.
Que no hacer:
- No poner nunca en marcha el aparato si la cuchilla y la
tapa jarra no están bien colocadas y bien sujetas.
Manual ROWZER PLUS 2018.indd 18 15/11/18 9:54
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Taurus Rowzer Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Taurus Rowzer Plus in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info